International2cvFriends.com
http://www.international2cvfriends.com/forum/

BMW 2cv engine conversion "2.0"
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=5000		 Page 5 of 43
Author:  Saurus [ January 11th, 2014, 4:44 pm ]
Post subject:  Re: BMW 2cv engine conversion
lpgo wrote:
In the gearbox I have 2 25/52mm bearings and ive modified the hole of the ingoing shaft (took out the tube which sits in there) suprisingly it is 25mm now...

Wait, so you've drilled out the part where the "threaded" part of the shaft sits in the bellhousing?
Author:  lpgo [ January 12th, 2014, 12:52 am ]
Post subject:  Re: BMW 2cv engine conversion
@fritz, at the moment I'm trying to get having a spacer made for BMW crankshaft and 2cv flywheel, it is going to be machined so 10 pieces are almost as much as 1 piece but wtf do I do wit 10 pieces...... Anyone in the need for a spacer??????

But once again my ignition is absorbing all my sparetime at the moment.........

@saurus. You don;t need to drill it out you can hamer the piece out....... and then you have a nice shaft (with bearings in the gaps) all the way across the gearbox 25mm....
Author:  subarupete [ January 12th, 2014, 2:49 pm ]
Post subject:  Re: BMW 2cv engine conversion
Lpgo Pm the Price please
cheers
peter
Author:  lpgo [ January 12th, 2014, 5:32 pm ]
Post subject:  Re: BMW 2cv engine conversion
subarupete wrote:
Lpgo Pm the Price please
cheers
peter



Prices pm-med....
Author:  AZS [ January 12th, 2014, 11:37 pm ]
Post subject:  Re: BMW 2cv engine conversion
Me too please
Author:  lpgo [ January 12th, 2014, 11:55 pm ]
Post subject:  Re: BMW 2cv engine conversion
AZS wrote:
Me too please



Price pm-med.
Author:  lpgo [ February 9th, 2014, 9:18 pm ]
Post subject:  Re: BMW 2cv engine conversion
Spend some quality time at my Beamer conversion this weekend.... Yesterday rolled my Turbo 2cv out of the garage turned it on the street and reversed it into my garage again....
So now the motorcompartiment is accesable...

So first took 65hp out ot the engine-bay (my turbo engine) and 100hp in the engine-bay (Beamer engine)...

Everything went fine so here are the pics....

Attachment:
beamer24.jpg

Attachment:
beamer21.jpg

Attachment:
beamer23.jpg


Attachment:
beamer20.jpg

Attachment:
beamer26.jpg

Attachment:
beamer27.jpg

Attachment:
beamer22.jpg

Attachment:
beamer28.jpg



As you can see it is going to be the fastest drummer ever 8-) 8-) 8-) 8-) 8-) :D :D
Author:  db78 [ March 5th, 2014, 7:59 pm ]
Post subject:  Re: BMW 2cv engine conversion
lpgo wrote:
subarupete wrote:
Lpgo Pm the Price please
cheers
peter



Prices pm-med....


Can you pm me a price too if you got any left? Ha ha.
I can get the machine shop at work to make me one but I still need time to do a drawing.

I currently been sorting through my wiring as I have the full loom from the BMW bike.
Author:  banjo [ March 5th, 2014, 9:04 pm ]
Post subject:  Re: BMW 2cv engine conversion
Not sure if the plywood is going to be strong enough LOL
Author:  jasu [ March 7th, 2014, 8:46 pm ]
Post subject:  Re: BMW 2cv engine conversion
lpgo wrote:
Attachment:
beamer28.jpg



As you can see it is going to be the fastest drummer ever 8-) 8-) 8-) 8-) 8-) :D :D

Image
Well...

That was at summer 2010...



And, next summer there were disc brakes on all wheels... :roll:
Page 5 of 43 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/