Do a proper job, oversize or replace the arm.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| New kingpins - oversize or not? http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4900 |
Page 1 of 1 |
| Author: | Saurus [ July 17th, 2013, 8:23 pm ] |
| Post subject: | New kingpins - oversize or not? |
Is there a way to check if I need new kingpins in oversize? Do I only need those when the old one is already loose and rotating in the suspension arm? |
|
| Author: | Sean [ July 17th, 2013, 9:07 pm ] |
| Post subject: | Re: New kingpins - oversize or not? |
if a standard pin is an easy push or a light tap with a hammer then either oversize pin or shrink the eye with a weld |
|
| Author: | ayjay [ July 17th, 2013, 11:10 pm ] |
| Post subject: | Re: New kingpins - oversize or not? |
or use a standard pin but before fitting it drill a hole in the side of the lug that it passes through and tap a thread for a 8mm bolt too lock the pin in place |
|
| Author: | 2CViking [ July 18th, 2013, 8:06 am ] |
| Post subject: | Re: New kingpins - oversize or not? |
Do a proper job, oversize or replace the arm.
|
|
| Author: | dave 411 [ July 18th, 2013, 8:31 am ] |
| Post subject: | Re: New kingpins - oversize or not? |
ayjay wrote: or use a standard pin but before fitting it drill a hole in the side of the lug that it passes through and tap a thread for a 8mm bolt too lock the pin in place 
|
|
| Author: | Sean [ July 18th, 2013, 8:47 am ] |
| Post subject: | Re: New kingpins - oversize or not? |
2CViking wrote: Do a proper job, oversize or replace the arm. or shrink the eye its been standard practice since they started making stuff out of metal 
|
|
| Author: | Sean [ July 18th, 2013, 8:49 am ] |
| Post subject: | Re: New kingpins - oversize or not? |
dave 411 wrote: ayjay wrote: or use a standard pin but before fitting it drill a hole in the side of the lug that it passes through and tap a thread for a 8mm bolt too lock the pin in place ive got a mate who actually drills and WELDS the pins in - he has won a good few races in the past . that really is a one way street 
|
|
| Author: | ayjay [ July 18th, 2013, 2:58 pm ] |
| Post subject: | Re: New kingpins - oversize or not? |
i try 
|
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|