@lpgo
Have seen those
, will carry on with the lotto now and again
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Argentinian Crankshaft? http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4854 |
Page 1 of 2 |
| Author: | subarupete [ June 17th, 2013, 4:07 pm ] |
| Post subject: | Argentinian Crankshaft? |
Crankshaft perhaps Argentinian manufacture.? Any info? |
|
| Author: | Roy Eastwood [ June 17th, 2013, 4:18 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
Ex racer in Warwick had a few on ebay recently, new old stock from Industrias Eduardo Sal Lari, the guys who made 2cvs in Arg. when Citroen stopped. |
|
| Author: | subarupete [ June 17th, 2013, 4:26 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
@Roy Are they any/as good as a French item??? |
|
| Author: | lpgo [ June 17th, 2013, 4:54 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
VGS in Belgium makes crankshafts out of 1 piece, downside 2000 euro, but garanteed up to 95 hp... http://www.vgs2cv.be/index.php/nl/component/spidercatalog/showproduct/163?product_id=5&page_num=1&back=1 |
|
| Author: | subarupete [ June 17th, 2013, 4:58 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
@lpgo Have seen those , will carry on with the lotto now and again
|
|
| Author: | lpgo [ June 17th, 2013, 6:54 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
and the winning numbers are............ 
|
|
| Author: | baron_matt [ June 17th, 2013, 7:08 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
lpgo wrote: VGS in Belgium makes crankshafts out of 1 piece, downside 2000 euro, but garanteed up to 95 hp... http://www.vgs2cv.be/index.php/nl/component/spidercatalog/showproduct/163?product_id=5&page_num=1&back=1 Nice, but where are my one piece con rods? |
|
| Author: | Roy Eastwood [ June 17th, 2013, 7:29 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
My suggestion would be to try it  subarupete wrote: @Roy Are they any/as good as a French item??? |
|
| Author: | subarupete [ June 17th, 2013, 8:59 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
@Nice, but where are my one piece con rods?[/quote] No longer showing the two piece conrods?? |
|
| Author: | Mec [ June 22nd, 2013, 10:32 pm ] |
| Post subject: | Re: Argentinian Crankshaft? |
No new crankshaft in Argentina |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|