| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Remote oil filter http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4849 |
Page 1 of 1 |
| Author: | wiltz [ June 16th, 2013, 12:27 pm ] |
| Post subject: | Remote oil filter |
I'm thinking of fitting a remote oil filter to my 425 Azam's engine, would it be best to break into the oil cooler feed pipe? is the pump up to it would a motorcycle type be preferable, I know its not original but can only be a good thing judging from the sludge in the sump on strip down 
|
|
| Author: | Harley [ June 17th, 2013, 2:37 pm ] |
| Post subject: | Re: Remote oil filter |
I don't know the 435cc engine but assume it doesn't have oil filter... I understand that the way a 602 oil cooler works is that the circuit will bypass it if it is blocked, this would mean that by adding a remote filter inline with the oil cooler would not filter all the oil I suspect, but some is better than none! I also believe that modern filters also have a bypass in the event they are blocked also. [img] http://www.pp-2cv.be/FR/News/Pic%20info ... %202cv.jpg[/img] Hope that helps... Harley |
|
| Author: | Roy Eastwood [ June 17th, 2013, 4:10 pm ] |
| Post subject: | Re: Remote oil filter |
|
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
