International2cvFriends.com
http://www.international2cvfriends.com/forum/

Brake pipes
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4743		 Page 1 of 1
Author:  jack_dyane [ May 5th, 2013, 9:53 pm ]
Post subject:  Brake pipes
Hi all, I'm after diagrams/pictures of the acadiane prake pipe system from the master cylinder to the rear brake pipe union. I know there are two seperate pipes which go through a load compensator(?). But I have no idea what it looks like or where it is fitted. Not to mention where I can get my paws on one.
Help much appreciated.
Author:  ChrisW [ May 5th, 2013, 10:25 pm ]
Post subject:  Re: Brake pipes
http://www.mcda.com/154-tuyauterie-freins-mehari?p=2

Does this help? plus page 1
Author:  2CViking [ May 5th, 2013, 10:34 pm ]
Post subject:  Re: Brake pipes
Just ignore it.

Attachment:
P4272054.JPG
Author:  ken [ May 5th, 2013, 11:22 pm ]
Post subject:  Re: Brake pipes
If you do ignore it, best to use *2CV size rear wheel cylinders and make sure that you connect the brake pipes at the master cylinder 2CV style, not reversed as they would have been with the brake limiter in place.

http://www.ecas2cvparts.co.uk/-c-38_49_50.html
* 16mm diameter, not 17.5mm

ken



2CViking wrote:
Just ignore it.

Attachment:
P4272054.JPG
Author:  jack_dyane [ May 5th, 2013, 11:41 pm ]
Post subject:  Re: Brake pipes
thanks much!
Author:  smyth602 [ May 9th, 2013, 1:50 pm ]
Post subject:  Re: Brake pipes
2CViking wrote:
Just ignore it.

Attachment:
P4272054.JPG


Yup, that's pretty much exactly what my one looks like!

I'm planning a brake overhaul soon - might see if i can actually get mine working the way it was intended...
Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/