Quality time with a mate putting an engine together, driving beers and forgetting the paper gasket on the oil pump.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Tutoriels 2CV http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4618 |
Page 1 of 1 |
| Author: | Smiffy [ March 15th, 2013, 11:53 am ] |
| Post subject: | Tutoriels 2CV |
In French, but very clear. Whole bunch of this guy's videos here. |
|
| Author: | 2CViking [ March 15th, 2013, 12:11 pm ] |
| Post subject: | Re: Tutoriels 2CV |
Quality time with a mate putting an engine together, driving beers and forgetting the paper gasket on the oil pump.
|
|
| Author: | ken [ March 15th, 2013, 12:42 pm ] |
| Post subject: | Re: Tutoriels 2CV |
Sandpapering the engine casing probably not the best of ideas either?  2CViking wrote: Quality time with a mate putting an engine together, driving beers and forgetting the paper gasket on the oil pump. |
|
| Author: | Smiffy [ March 15th, 2013, 12:52 pm ] |
| Post subject: | Re: Tutoriels 2CV |
ken wrote: Sandpapering the engine casing probably not the best of ideas either? What would you do instead? |
|
| Author: | ken [ March 15th, 2013, 1:04 pm ] |
| Post subject: | Re: Tutoriels 2CV |
I've no idea why he did that, as it's virtually guaranteed that there will be some grit left in the cases ( unless they went into a parts washer and were blown out with compressed air afterwards). If there's anything which needs to be cleaned off, a gasket scraper should be used, never an abrasive medium... ken Smiffy wrote: ken wrote: Sandpapering the engine casing probably not the best of ideas either? What would you do instead? |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|