| Author |
Message |
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
 Crank timing gear Anyone removed this gear? I had a 2cv in with a serious knocking. It turned out the the front aluminium cage (behind the timing gear had moved 20 mm around. Someone placed the bearing wrong and clamped the 2 engine blocks together with the bearing in the wrong place. Eventually the a 20 mm long groove appeared allowing the bearing to turn and swift back. I would like to remove the timing gear but can't remember if it is possible? The crank is too good to bin
You do not have the required permissions to view the files attached to this post.
_________________
|
| March 13th, 2013, 1:19 pm |
 
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2847
Location: NL
|
Re: Crank timing gear Yes it is possible, but I don't know how (press I guess), I know VGS in Belgium is doing that it seems that the toothwheel can be as much as 6 degrees of (from the Citroen fabric), making your engine run like crap, valvetiming is of then...... picture of there website.... camshaft without camwheel 
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| March 13th, 2013, 1:24 pm |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: Crank timing gear Thanks mate. What about the crank?
_________________
|
| March 13th, 2013, 1:26 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2847
Location: NL
|
Re: Crank timing gear 2CViking wrote: Thanks mate. What about the crank? Take a look at there site (several pics) http://www.vgs2cv.be/index.php/en/2cv-visa-crankshaft.html
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| March 13th, 2013, 1:31 pm |
|
|
|
Bart
Firing on two.
Joined: February 12th, 2009, 6:17 pm
Posts: 316
Location: North
|
Re: Crank timing gear Crank can be done too Peter. For similar reasons I got main bearings replaced by Burton on a crank the other day.
_________________
|
| March 14th, 2013, 8:24 pm |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: Crank timing gear Bart wrote: Crank can be done too Peter. For similar reasons I got main bearings replaced by Burton on a crank the other day. Ya I've seen the crank press that Burton dug out in northern Africa not long ago. It is a monster press, supposedly used by Citroen maybe in Algeria
_________________
|
| March 14th, 2013, 9:50 pm |
|
|
