Fuck James,SPUND
,read through before you press the submit button,and using an i phone is no excuse 
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Replacing sound proofing http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4596 |
Page 1 of 2 |
| Author: | J-dub [ March 9th, 2013, 9:02 am ] |
| Post subject: | Replacing sound proofing |
Anyone done this succesfully? Id like to replace the horrible brittle soundproofing above the shelf in the front on the bulkhead. As well as below but cant seem to find it on any suppliers websites. |
|
| Author: | Geert [ March 9th, 2013, 9:24 am ] |
| Post subject: | Re: Replacing spund proofing |
I replaced mine, during the restoration of my van. This is modern stuff, thinner than the old one. It is a very difficult job, to do it properly, and it does not fit very well, I had to cut mine to have a proper fit. Best is to remove the whole dashboard . Ask Peter, 2CViking : http://www.2cviking.eu/catalog/product_ ... cts_id=889 |
|
| Author: | dave 411 [ March 9th, 2013, 9:44 am ] |
| Post subject: | Re: Replacing spund proofing |
Fuck James,SPUND ,read through before you press the submit button,and using an i phone is no excuse
|
|
| Author: | dave 411 [ March 9th, 2013, 9:47 am ] |
| Post subject: | Re: Replacing spund proofing |
I made some templates,and bought some good quality soundproofing from somewhere in Cwmbran.Stuck it on with good quality glue,not the spray stuff,thats crap.the put some black carpet over it.Looks good.I have the templates in my garage if you want some. |
|
| Author: | banjo [ March 9th, 2013, 12:23 pm ] |
| Post subject: | Re: Replacing spund proofing |
I covered the original stuff with grey Berber type carpet tiles, these were used above the dash,on the parcel shelf and bulk head.I also have thick carpet on the front and rear floors,using the rubbers as templates.This has made the car a lot quieter besides I like the dark red carpet! The boot is floored out and carpeted also.... |
|
| Author: | Russell [ March 9th, 2013, 1:12 pm ] |
| Post subject: | Re: Replacing spund proofing |
My car is already fully resistant to Spunds. |
|
| Author: | Harley [ March 9th, 2013, 1:27 pm ] |
| Post subject: | Re: Replacing spund proofing |
Best Spund dedander round http://www.dynamat.com/ Karverd kermit frum arshole tu brekfast time wiff it, qwuiet az ah non in cherch. Arley |
|
| Author: | J-dub [ March 9th, 2013, 1:32 pm ] |
| Post subject: | Re: Replacing spund proofing |
Geert wrote: I replaced mine, during the restoration of my van. This is modern stuff, thinner than the old one. It is a very difficult job, to do it properly, and it does not fit very well, I had to cut mine to have a proper fit. Best is to remove the whole dashboard . Ask Peter, 2CViking : http://www.2cviking.eu/catalog/product_ ... cts_id=889 Is it worth the hassle? Its not that bad |
|
| Author: | ChrisW [ March 9th, 2013, 2:06 pm ] |
| Post subject: | Re: Replacing sound proofing |
http://www.woolies-trim.co.uk/c-15-sound-deadening.aspx Used this firm many times before for different things - great service |
|
| Author: | Matt_S [ March 9th, 2013, 6:14 pm ] |
| Post subject: | Re: Replacing spund proofing |
Harley wrote: Best Spund dedander round http://www.dynamat.com/ Karverd kermit frum arshole tu brekfast time wiff it, qwuiet az ah non in cherch. Arley Well done Harley, got to be the best piss take post to date
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|