I think there are a number of variations on the theme; my ENAC has the bottom of the legs fitted into the flat boot floor that is part of that kit; but others I've seen are very different... Manufacturer? pics, we like pics...
mike
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| frame that fits the rear http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4579 |
Page 1 of 2 |
| Author: | ayjay [ March 1st, 2013, 6:52 pm ] |
| Post subject: | frame that fits the rear |
can anyone point me in the right direction to find instructions/pics to fit the tubular frame"hatchback boot conversion" that allows the rear 2cv D*lly window to open?its in 2 parts and has lots of bolts and brackets all we need is some kind of diagram to see how to fit it thanks all |
|
| Author: | citroenboat [ March 1st, 2013, 7:06 pm ] |
| Post subject: | Re: frame that fits the rear |
I think there are a number of variations on the theme; my ENAC has the bottom of the legs fitted into the flat boot floor that is part of that kit; but others I've seen are very different... Manufacturer? pics, we like pics... mike |
|
| Author: | ayjay [ March 1st, 2013, 11:21 pm ] |
| Post subject: | Re: frame that fits the rear |
thanks for your reply citoenboat i,ll take some pics tomorrow james wallace sold it to my bro, very nice it is btw
|
|
| Author: | knightley [ March 2nd, 2013, 12:15 am ] |
| Post subject: | Re: frame that fits the rear |
ayjay wrote: can anyone point me in the right direction to find instructions/pics to fit the tubular frame"hatchback boot conversion" that allows the rear 2cv D*lly window to open?its in 2 parts and has lots of bolts and brackets all we need is some kind of diagram to see how to fit it thanks all James Wallace of this parish had a conversion kit off me a few weeks ago. I swapped for a towbar. He put it up for sale recently. There were no instructions on how to fit. Found my original advert viewtopic.php?f=13&t=4257&hilit=conversion+kit |
|
| Author: | ayjay [ March 2nd, 2013, 12:26 am ] |
| Post subject: | Re: frame that fits the rear |
oh, thanks knightly,i,ll have a rummage around past posts james actually sold this frame to my brother btw |
|
| Author: | knightley [ March 2nd, 2013, 12:30 am ] |
| Post subject: | Re: frame that fits the rear |
I edited my above post after I re-read your original. There were no instructions on how to fit. |
|
| Author: | ayjay [ March 2nd, 2013, 12:32 am ] |
| Post subject: | Re: frame that fits the rear |
its a bit of a conundrum
|
|
| Author: | J-dub [ March 2nd, 2013, 1:46 am ] |
| Post subject: | Re: frame that fits the rear |
Yes John i moved it on as i wasnt using it so found a better home 
|
|
| Author: | banjo [ March 2nd, 2013, 3:35 pm ] |
| Post subject: | Re: frame that fits the rear |
http://www.franzose.de/en/Citroen-2CV/2 ... /ANR17082/ The link shows the frame in place, I had the two mounting holes in my 2cv on the frame above the rear quarter lights,which is where the frame hings from,the other 4 fixing points are already there on he inside of the boot on the strengthening ribs,I think they take the snap in type of fixing with a captive nut. The frame that holds the tailgate up hinges from the rear shelf/hammock brackets,they have the holes in already. That support frame sits in clips fixed near the bottom of the rear screen.. I hope this helps,I have to admit I've never fitted one but worked it out from seeing them in place and the known fixing points in my car,either way I would suggest it would become more obvious how it's done when you offer it up,good luck
|
|
| Author: | JAlanK [ March 2nd, 2013, 6:13 pm ] |
| Post subject: | Re: frame that fits the rear |
Hi ayjay I've fitted two in the past. It's basically what Banjo said. There is (or may be) a metal tab on the top of the rear window frame that needs to be removed ( or bent out of the way, I forget now). The way the roof hinges it doesn't go back into its slot. When I spoke to uncle Roy before buying mine from Club Cassis, he said he didn't sell them because it is possible for the back window to blow out. I find mine so useful I am still happy to live with that risk. Hope this helps. John. |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|