| Author |
Message |
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
 What's the 'thread' of a 2cv oil filter? Is 'thread' the correct term.
Also, what other cars can take the same filter?
|
| December 10th, 2012, 2:52 pm |
|
|
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
Re: What's the 'thread' of a 2cv oil filter?
|
| December 10th, 2012, 2:54 pm |
|
|
|
banjo
Firing on two.
Joined: June 5th, 2009, 9:17 am
Posts: 747
Location: Staffs & France
|
Re: What's the 'thread' of a 2cv oil filter? samfieldhouse wrote: Is 'thread' the correct term.
Also, what other cars can take the same filter? Thread is M16 x 1.5 nd the filter is the same as 1.1 & 1.3 peugeot according to Motoquip and GSF parts http://i.ebayimg.com/t/Oil-Filter-CITRO ... ~60_35.JPGDiameter [mm]:: 62 Diameter 2 [mm]:: 71 Diameter 3 [mm]:: 76 Thread Size:: M16 X 1.5 ADDITIONAL INFO:: one anti-return valve Bypass Valve Opening Pressure [bar]: 1,5 Filter Type:: Spin On Filter Quality
|
| December 10th, 2012, 3:58 pm |
|
|
|
Joolz
Firing on two.
Joined: January 5th, 2009, 5:48 am
Posts: 1687
Location: Haven't a clue
|
Re: What's the 'thread' of a 2cv oil filter? Firstly it would seem unlikely that it would fit a 2cv. Secondly why would you want to.
Ah, are we talking about M4s that dont have modern type filters? Would there be somewhere to fit something like this?
_________________
|
| December 10th, 2012, 4:29 pm |
|
|
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
Re: What's the 'thread' of a 2cv oil filter? I've just recovered an article from a 2003 edition of 2cvGB News where the writer fits one to his 2cv between the filter and the filter mount to enable an oil pressure and temperature switch to be fitted in the adapter. He bought one 'off the shelf' but the web link given is now broken. I've been trying to locate oil filter adapters and mostly they're listed by thread size, hence the initial question, but have failed to find any that match the 2cv thus far. 
|
| December 10th, 2012, 4:35 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2247
Location: Near Monmouth
|
Re: What's the 'thread' of a 2cv oil filter?
|
| December 10th, 2012, 4:50 pm |
|
|
|
banjo
Firing on two.
Joined: June 5th, 2009, 9:17 am
Posts: 747
Location: Staffs & France
|
Re: What's the 'thread' of a 2cv oil filter? http://www.franzose.de/en/Citroen-2CV/A ... /ANR10006/I think this is what you're after Sam.. The filter mount is about halfway down the page 
|
| December 10th, 2012, 5:19 pm |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: What's the 'thread' of a 2cv oil filter? is anyone running "2cvstuff" now Vick is no longer with us?
and TBH the engines run cool if they are set up right
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| December 10th, 2012, 8:09 pm |
|
|
|
Joolz
Firing on two.
Joined: January 5th, 2009, 5:48 am
Posts: 1687
Location: Haven't a clue
|
Re: What's the 'thread' of a 2cv oil filter? Are you looking to increase the oil capacity, or to fit a temperature/pressure switch?
I can't remember how much room there is between the standard filter and the chassis leg, but a lot of Citroens/Peugeots use the same oil filter fitting but vary in length and sometimes width, you would need to check what internal valves there are though.
If you're looking for somewhere to mount sensors then there's a good chance one designed for any Citroen could work.
_________________
|
| December 10th, 2012, 8:18 pm |
|
|
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
Re: What's the 'thread' of a 2cv oil filter? I've only started reading about the 'more capacity' argument lately, I was more interested in dials and sensors  Not sure what's become of 2cvStuff, I'll ask Dot though.
|
| December 10th, 2012, 10:07 pm |
|
|
