| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Carb return spring outer replacement http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4193 |
Page 1 of 2 |
| Author: | Tim2cv [ September 3rd, 2012, 9:19 pm ] |
| Post subject: | Carb return spring outer replacement |
Any ideas? I've hauled the spindle out the carb but it is still a mystery.    I need to change the broken outer carb return spring as its broken but I haven't a scooby how?! Currently my throttle sticks and it makes D*lly a real pig to drive and my brakes hot! Any clues? Cheers Tim |
|
| Author: | Taskos [ September 4th, 2012, 10:53 am ] |
| Post subject: | Re: Carb return spring outer replacement |
These may be help... Looks like you're close. |
|
| Author: | Tim2cv [ September 4th, 2012, 12:10 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
Still no wiser... Thanks for the pics though. Perhaps I need to grind the end off and then weld it back on? |
|
| Author: | ayjay [ September 4th, 2012, 2:00 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
mines broken too tim,! ill take pics in a min and post them its a spare carb that i,m refurbing , bear with me---   the new spring is the first thing to fit ,then thefunny shaped metal plate then the second spring, then pass the shaft through the carb body |
|
| Author: | ayjay [ September 4th, 2012, 2:26 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
all i was going to do was fit a long return spring to the throttle arm to pull the arm back and just leave the broken spring in place 
|
|
| Author: | Tim2cv [ September 4th, 2012, 2:41 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
http://m.facebook.com/home.php?refid=0# ... =594675293 Sorry, at work so using my phone. How do you get that bit off? Am I being too gentle? |
|
| Author: | ayjay [ September 4th, 2012, 3:13 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
a,hhh, i see what your saying tim-- i think ken may know the answer to that sorry i don,t know |
|
| Author: | Tim2cv [ September 4th, 2012, 3:19 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
I want to replace the smaller outer spring between the bendy outer plate and smaller inner plate that interacts with the other bits. I'll do some more pics later to try and explain. Thanks Tim |
|
| Author: | Eastbourne 2cv6 [ September 4th, 2012, 6:49 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
About to do this job too, I'm a bit behind. that end bit SHOULD come off the spindle so you can get at the springs. Is it going to be at brute force job to pull it off? Bollocks I was hoping that was going to be the easy fun bit 
|
|
| Author: | Eastbourne 2cv6 [ September 4th, 2012, 9:03 pm ] |
| Post subject: | Re: Carb return spring outer replacement |
Further to previous post now at same stage as you. I've managed to twist my spindle   So err on the gentle side for now! will now have to get the spare one off the spare carb, but the screw heads on that butterfly are worn out, can't get a turn on them
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|