| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Headlamp bar loom http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4157 |
Page 1 of 1 |
| Author: | J-dub [ August 17th, 2012, 8:00 pm ] |
| Post subject: | Headlamp bar loom |
Does the loom go over and then turn right at the headlamp bar or under and along? Just I have it going under and it's too closets the heat exchanger |
|
| Author: | ken [ August 17th, 2012, 9:57 pm ] |
| Post subject: | Re: Headlamp bar loom |
Just behind and slightly below the level of the light bar. Tie wrap onto the air filter box, assuming you've got rid of the dread metal clip? Ken Jameswallace wrote: Does the loom go over and then turn right at the headlamp bar or under and along? Just I have it going under and it's too closets the heat exchanger |
|
| Author: | J-dub [ August 17th, 2012, 10:10 pm ] |
| Post subject: | Re: Headlamp bar loom |
Thanks ken I have kept the clip but put a piece of water hose with a slot in (making it c section) around the loom to stop any chance of chaffing the loom I'll cable tie it anyway Cheers |
|
| Author: | ayjay [ August 17th, 2012, 10:28 pm ] |
| Post subject: | Re: Headlamp bar loom |
the origional rubber wraps look nice |
|
| Author: | Neil [ August 17th, 2012, 10:34 pm ] |
| Post subject: | Re: Headlamp bar loom |
Jameswallace wrote: ( c section) I was one of those |
|
| Author: | J-dub [ August 17th, 2012, 10:40 pm ] |
| Post subject: | Re: Headlamp bar loom |
I've lost one if anyone has one with the strap. Monies await |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|