International2cvFriends.com
http://www.international2cvfriends.com/forum/

***kin STEERING LOCK !!!!!!!
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=4058		 Page 1 of 2
Author:  48pop [ June 30th, 2012, 10:25 pm ]
Post subject:  ***kin STEERING LOCK !!!!!!!
Came back from supermarket,parked stupidily to unload.......Shopping out I went ti move the car.....Key would not go back in then I broke it in the struggle.....F*ck !!

So car immobile in a stupid place, what to do next...Thank goodness for battery powered tools...An hour later, skint knuckles, LOTS of swearing, burnt finger and the column is loose.

A couple of bolts with most of the head removed allowed a temp securing of the column and a surprisingly simple hotwire and we are back in action!

Sooooooo, whats the alternative to 100 quids worth of replacement lock?

New clamp is a given, what size is the nut? I'd rather not use shear nuts...

Last thing I needed tonight :( :( :( :( :( :(

Cheers
Gerry
Author:  J-dub [ June 30th, 2012, 11:45 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
Gerry

I had this once,

i gave it a touch of Wd in the lock and bob was my uncle once again

i geuss its too late to say that

You can disable the steering lock in 30 seconds on a 2cv, its un believable easy,

as for hotwiring, i always carry my hot wire kit in the boot just incase ;) even got proper 2cv connections from a 2cv loom to make it plug and play quickly ;)
Author:  Sean [ July 1st, 2012, 10:07 am ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
48pop wrote:

Sooooooo, whats the alternative to 100 quids worth of replacement lock?

New clamp is a given, what size is the nut? I'd rather not use shear nuts...



Cheers
Gerry

a second hand one? ( and next time remove the collar from the column so it never happens again)

Ubolt is 11mm M7
Author:  48pop [ July 1st, 2012, 6:02 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
When I got it off, the collar flew over the nearest hedge......
Author:  48pop [ July 1st, 2012, 6:02 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
When I got it off, the collar flew over the nearest hedge......
Author:  Devils Advocate [ July 2nd, 2012, 10:26 am ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
Once is careless, but twice...
Author:  Devils Advocate [ July 2nd, 2012, 10:38 am ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
48pop, what new parts do you need? Replacement barrels - for the ignition and 2 doors - is around £25 akaIk. And you'll have 3 new keys too...
Author:  Sean [ July 2nd, 2012, 5:58 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
not on a 2cv its not - ignition lock with cast housing and big key £99.50 plus postage, totally un related door keys and barrels 2 of, 2 keys £14.30. :(

Seans big shed of bits = beest priiiice :lol:
Author:  Nelsthebass [ July 2nd, 2012, 6:16 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
Just leave it disabled and use a flick switch and push button start panel that you can get off of fleabay for a few quid and buy yourself a Krooklock!
Author:  ayjay [ July 2nd, 2012, 6:23 pm ]
Post subject:  Re: ***kin STEERING LOCK !!!!!!!
mine has that-- the original key lock jammed up ages ago mine has a metal plate with a s/hand ig switch and a press button now
Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/