International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Loose throttle linkage on carb http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3843 |
Page 1 of 1 |
Author: | Rumble602 [ April 10th, 2012, 9:50 pm ] |
Post subject: | Loose throttle linkage on carb |
Seem to be posting a lot of technical queries recently... but Fiddling with J tonight I noticed that the throttle linkage on the side of the carb body on J is really quite loose... probably due to be pulled off line by too strong a throttle spring. The idle adjuster screw doesn't sit properly in line with the choke linakge, and the whole throttle linkage can be wobbled about by hand. I can shoot some video of this tomorrow and post it, but the question really is how worried should I be that the linkage will come away from the carb body? Cheers Aidan |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |