Would it be possible to drop rear facing seats in the back? They would be easier to access through the rear doors and child would be a little closer to those up front.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| acadiane front seats http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3734 |
Page 1 of 2 |
| Author: | tarquin slough2cv [ March 4th, 2012, 11:55 pm ] |
| Post subject: | acadiane front seats |
well it looks like im keeping the acad. now to make it child frendly. thinking mini bus seats in the back with 3 point seat belts fitted to the seats. next problem getting child in to rear seats with front seats in place, poss solution those that know me will remember the first zx i had it was a 3 door and 3 door cars have tilt and slide front seats to get to the rear. so will zx front seats fit the acad? ive got bx seats in it already so zx ones cant be much bigger. any one fitted these and if so how and anyone know of any zx seats around |
|
| Author: | ken [ March 5th, 2012, 12:52 am ] |
| Post subject: | Re: acadiane front seats |
Tarquin, a folding passenger seat was an option for Acadianes from 1979 onwards. Might be worth considering if there's limited space for seats from another vehicle. Ken |
|
| Author: | Jonathan [ March 5th, 2012, 1:10 am ] |
| Post subject: | Re: acadiane front seats |
Would it be possible to drop rear facing seats in the back? They would be easier to access through the rear doors and child would be a little closer to those up front.
|
|
| Author: | Jono [ March 5th, 2012, 2:00 pm ] |
| Post subject: | Re: acadiane front seats |
Jonathan wrote: Would it be possible to drop rear facing seats in the back? They would be easier to access through the rear doors and child would be a little closer to those up front. And probably throwing up all the while. I know I would be if I had to face backwards in a car (especially with Tarquin driving!). |
|
| Author: | Jonathan [ March 5th, 2012, 2:50 pm ] |
| Post subject: | Re: acadiane front seats |
 I'd be throwing up in the back with the seats in the conventional position, and in the front, too. I don't travel well unless I'm in the driver's seat. 
|
|
| Author: | samfieldhouse [ March 5th, 2012, 3:13 pm ] |
| Post subject: | Re: acadiane front seats |
I'm after an Acad mixte folding passenger seat, if you're disposing of one Simon? |
|
| Author: | Will2cv [ March 5th, 2012, 5:05 pm ] |
| Post subject: | Re: acadiane front seats |
Tim Favell has got ZX front seats in his 2cv, so I see no reason why they wouldn't fit in an acad. |
|
| Author: | samfieldhouse [ March 5th, 2012, 7:33 pm ] |
| Post subject: | Re: acadiane front seats |
Do Acads have the 20cm rise in level between cab floor and van bed floor? That's the issue I had with Hetty - I wanted Mazda coupe seats but to get them (or many other) seats in a van you have to cut the van body around. |
|
| Author: | Will2cv [ March 5th, 2012, 9:34 pm ] |
| Post subject: | Re: acadiane front seats |
Sam - Acads have a longer cab area than 2cv vans though so you can fit other seats in a lot easier. |
|
| Author: | Tim2cv [ March 6th, 2012, 2:32 pm ] |
| Post subject: | Re: acadiane front seats |
Correct, I have ZX 5 dr front seats in my D0lly. Doubt they will fit in an AKS400 but should have alot of space in an Acadiane. Think Pug 205/309 seats were tilt and slide too. Alot of cheap options if you want, just remember they will be low unless you make up frames etc to normal height. |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|