| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Steering Column removal http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3608 |
Page 1 of 2 |
| Author: | james2cv [ January 15th, 2012, 3:22 pm ] |
| Post subject: | Steering Column removal |
Ok before I start this job, apart from the clamp in the groove at the rack end, my car doesn't have a steering lock. Does this mean that I can just take the clamp off and get it out with a mallet? I just don't want to start this job and not be able to finish it because I need the car in a few hours.  Cheers
|
|
| Author: | 2cvkeza [ January 15th, 2012, 4:16 pm ] |
| Post subject: | Re: Steering Column removal |
You did get of clamp ,bolt and nut ... so, pull out steering column. ... why do you need mallet ? |
|
| Author: | J-dub [ January 17th, 2012, 9:08 am ] |
| Post subject: | Re: Steering Column removal |
You probably will need a mallet Grease the bottom on re assembly, If your steering locks non existent it should be fine. If not its 30 seconds to pop it back in and re clamp!! |
|
| Author: | dave 411 [ January 17th, 2012, 9:10 am ] |
| Post subject: | Re: Steering Column removal |
James,l0cls,wtf 
|
|
| Author: | J-dub [ January 17th, 2012, 9:15 am ] |
| Post subject: | Re: Steering Column removal |
Fucking phone |
|
| Author: | dave 411 [ January 17th, 2012, 9:55 am ] |
| Post subject: | Re: Steering Column removal |
They are difficult.I find it better to turn it on its side. 
|
|
| Author: | J-dub [ January 17th, 2012, 1:11 pm ] |
| Post subject: | Re: Steering Column removal |
dave 411 wrote: :lol: They are difficult.I find it better to turn it on its side. Or smash it up |
|
| Author: | Jonathan [ January 17th, 2012, 8:30 pm ] |
| Post subject: | Re: Steering Column removal |
Or take your time and proofread before submitting.
|
|
| Author: | dave 411 [ January 19th, 2012, 9:45 am ] |
| Post subject: | Re: Steering Column removal |
Now thats a good idea,,,,,,,,,James |
|
| Author: | banjo [ January 20th, 2012, 2:43 pm ] |
| Post subject: | Re: Steering Column removal |
 While you have it off ( no not that  ) make the slot in the bottom of the column a bit longer,either hack saw or angle grinder this will make it clamp better onto the steering rack.
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|