4Euro v £21
£21 vs 4Euro
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Bullet connectors for the coil http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3532 |
Page 1 of 2 |
| Author: | Rumble602 [ December 7th, 2011, 8:37 pm ] |
| Post subject: | Bullet connectors for the coil |
As the title really.... Where can you get the nice long oe style bullet connectors to fit onto the coil? Nikki's had to do a partial rewire due to a small electrical fire, and is struggling with a standard bullet connector. Cheers all, Aidan |
|
| Author: | Tom Duckpower [ December 7th, 2011, 8:51 pm ] |
| Post subject: | Re: Bullet connectors for the coil |
are they the same as the other connectors in the wiring loom? http://link.marktplaats.nl/508841776 |
|
| Author: | ken [ December 7th, 2011, 9:24 pm ] |
| Post subject: | Re: Bullet connectors for the coil |
They are indeed... < http://www.ecas2cvparts.co.uk/connector ... p-255.html > ken Tom Duckpower wrote: are they the same as the other connectors in the wiring loom? http://link.marktplaats.nl/508841776 |
|
| Author: | J-dub [ December 7th, 2011, 11:39 pm ] |
| Post subject: | Re: Bullet connectors for the coil |
if your only after a few let me know as i have a spare loom that ive cut all the connectors off, i can send you any you want for a a drink in return, it would be patchwork quilt job but you could do that or do it nicely and get the ecas kit which looks superb! |
|
| Author: | Rumble602 [ December 8th, 2011, 11:41 pm ] |
| Post subject: | Re: Bullet connectors for the coil |
Cheers chaps. I'd seen the ones at ecas and thought they'd be the ones. I'll let nikki know. |
|
| Author: | Sean [ December 9th, 2011, 9:03 am ] |
| Post subject: | Re: Bullet connectors for the coil |
4Euro v £21 £21 vs 4Euro
|
|
| Author: | Tom Duckpower [ December 9th, 2011, 9:15 am ] |
| Post subject: | Re: Bullet connectors for the coil |
Sean wrote: 4Euro v £21 £21 vs 4Euro for a set of 10 pcs... with postage (for the Netherlands that is) 
|
|
| Author: | richardmorris [ December 9th, 2011, 10:23 am ] |
| Post subject: | Re: Bullet connectors for the coil |
Rumble602 wrote: As the title really.... Where can you get the nice long oe style bullet connectors to fit onto the coil? Nikki's had to do a partial rewire due to a small electrical fire, and is struggling with a standard bullet connector. Cheers all, Aidan If you're stuck you can use standard shape bullet connectors if you crimp down the cylinder a little. I've done this for the tow bar wiring (real 2CV lights  ) and they can hold tightly enough.
|
|
| Author: | subarupete [ December 9th, 2011, 11:45 am ] |
| Post subject: | Re: Bullet connectors for the coil |
Try these guys http://www.vehicle-wiring-products.eu/V ... sterms.php |
|
| Author: | ken [ December 9th, 2011, 2:04 pm ] |
| Post subject: | Re: Bullet connectors for the coil |
Just ordered some of these to try, with any luck the insulating sleeves should be more resistant to aging than the rubber type used by Citroen. http://www.ebay.co.uk/itm/110754626915? ... _862wt_698 |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|