Keep the van insideand never use it
Nah, spray stuff down there I recon
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| How good are rust converters? http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3500 |
Page 1 of 2 |
| Author: | dave 411 [ November 25th, 2011, 10:27 am ] |
| Post subject: | How good are rust converters? |
Hi all, I was wondering about your experience using rust converters.I have used the Bilt Hamer converter and it seems ok,but ,I was thinking"can you paint/waxoyl" directly over the top of it? What i am thinking is,on my van,it has top hat shaped chaneling down the sides,back doors,fuel tank cover and spare wheel cover.As you cant see behind them,and they look like perfect water traps,I want to spray something in there to stop the rust,then spray some Bilt Hamer stuff(cant remember the number of it,sorry,its brown and in a large spray can,comes with a long probe)in there afterwards to prevent any further rust. So,do you think that would work? Ta. |
|
| Author: | J-dub [ November 25th, 2011, 10:49 am ] |
| Post subject: | Re: How good are rust converters? |
Keep the van insideand never use it Nah, spray stuff down there I recon |
|
| Author: | ginger bloke [ November 25th, 2011, 11:03 am ] |
| Post subject: | Re: How good are rust converters? |
I've used the dinitrol rust convertor and both painted over it and used dinitrol wax no problems. |
|
| Author: | Smiffy [ November 25th, 2011, 11:56 am ] |
| Post subject: | Re: How good are rust converters? |
The only one I rate is this:  You can get it on ebay, or camskill etc etc |
|
| Author: | Sean [ November 25th, 2011, 8:35 pm ] |
| Post subject: | Re: How good are rust converters? |
how does it work? by pulverising rust! erm kind of lost me after that 
|
|
| Author: | Smiffy [ November 28th, 2011, 11:40 pm ] |
| Post subject: | Re: How good are rust converters? |
Sean wrote: how does it work? Dunno. It definitely works though. |
|
| Author: | rustybus [ November 29th, 2011, 5:10 pm ] |
| Post subject: | Re: How good are rust converters? |
This the best of the lot and is award winning too.... http://www.bilthamber.com/pro-introduct ... drate%2080 |
|
| Author: | dave 411 [ November 29th, 2011, 7:24 pm ] |
| Post subject: | Re: How good are rust converters? |
Got some.Will start spraying it on the weekend 
|
|
| Author: | Willami [ December 1st, 2011, 4:46 pm ] |
| Post subject: | Re: How good are rust converters? |
rustybus wrote: This the best of the lot and is award winning too.... http://www.bilthamber.com/pro-introduct ... drate%2080 yup, i'd second that - brilliant stuff. I've left areas un-painted after applying this and it stands up to the elements fine.....gonna top-coat soon...honest |
|
| Author: | panelbeaterpeter [ December 2nd, 2011, 1:22 am ] |
| Post subject: | Re: How good are rust converters? |
I use Wurth rust converter. Same as the Dinitrol one. Jenolite is good too, but needs leaving longer. I'm a little suspicious of anything that claims to kill rust completely, I just try and slow it down. |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|