International2cvFriends.com
http://www.international2cvfriends.com/forum/

Shock absorber mount
http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=3371
Page 1 of 2

Author:  Chris 2cv [ September 29th, 2011, 10:10 pm ]
Post subject:  Shock absorber mount

Has anyone seen this happen before put new shocks on about 3 weeks ago then today heard a bit of a creaking noise had a look underneath and found this any ideas how and why its happened?

Image
IMAG0441 by Chris 2cv, on Flickr

Author:  2CViking [ September 29th, 2011, 10:12 pm ]
Post subject:  Re: Shock absorber mount

Yes often seen on raid cars. Welding should fix that problem

Author:  Chris 2cv [ September 29th, 2011, 10:19 pm ]
Post subject:  Re: Shock absorber mount

I've got a spare one so will chuck another on just trying to work out how I managed to break it!!!

Author:  Sean [ September 29th, 2011, 10:23 pm ]
Post subject:  Re: Shock absorber mount

shocker plates on the wrong way round?

Author:  ken [ September 29th, 2011, 10:27 pm ]
Post subject:  Re: Shock absorber mount

Chris,
if I'm not very much mistaken, your damper mounting plates have been swapped over, which would explain why things fell apart...

ken

Image
Front damper plates swapped side to side... by slcchassis, on Flickr

Author:  Chris 2cv [ September 29th, 2011, 10:35 pm ]
Post subject:  Re: Shock absorber mount

Aha Thanks Sean and Ken I shall have a good look at my other 2cv tomorrow and check which way they are fitted on that. They must have been the wrong way around on this for ages as I've only ever taken them off one side at a time!!!!

Author:  Sean [ September 29th, 2011, 10:41 pm ]
Post subject:  Re: Shock absorber mount

Chris 2cv wrote:
Aha Thanks Sean and Ken I shall have a good look at my other 2cv tomorrow and check which way they are fitted on that. They must have been the wrong way around on this for ages as I've only ever taken them off one side at a time!!!!


makes no odds what the other one is doing those ones are wrong ;)

Author:  2cvkeza [ September 30th, 2011, 1:43 pm ]
Post subject:  Re: Shock absorber mount

Yes, I also think that it is left on right and right on left...

Author:  Chris 2cv [ September 30th, 2011, 8:52 pm ]
Post subject:  Re: Shock absorber mount

You were all spot on swapped round and alsorted now. Many thanks peoples!!!!

Author:  ken [ September 30th, 2011, 9:01 pm ]
Post subject:  Re: Shock absorber mount

Does it handle any better? ;)

ken


Chris 2cv wrote:
You were all spot on swapped round and alsorted now. Many thanks peoples!!!!

Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/