sound like your in a rush to drive somewhere
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Dipstick Seal. http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=2880 |
Page 1 of 3 |
| Author: | Little Louis [ April 6th, 2011, 8:45 pm ] |
| Post subject: | Dipstick Seal. |
It looks like the seal on my dipstick has gone, What do I do? Can I replace it? How can I replace it? Cheers Louis |
|
| Author: | J-dub [ April 6th, 2011, 9:13 pm ] |
| Post subject: | Re: Dipstick Seal. |
sound like your in a rush to drive somewhere
|
|
| Author: | Little Louis [ April 6th, 2011, 9:24 pm ] |
| Post subject: | Re: Dipstick Seal. |
I like it when my car works, and when my engine bay is clean 
|
|
| Author: | J-dub [ April 6th, 2011, 9:27 pm ] |
| Post subject: | Re: Dipstick Seal. |
but you cant drive it anyway
|
|
| Author: | Little Louis [ April 6th, 2011, 9:47 pm ] |
| Post subject: | Re: Dipstick Seal. |
I can, just not legally. |
|
| Author: | Luke [ April 6th, 2011, 9:52 pm ] |
| Post subject: | Re: Dipstick Seal. |
bit of gaffer tape? might be worth checking the crankcase vacuum though - I wonder if your breather's worn out?
|
|
| Author: | J-dub [ April 6th, 2011, 9:52 pm ] |
| Post subject: | Re: Dipstick Seal. |
fair cop |
|
| Author: | Little Louis [ April 6th, 2011, 9:55 pm ] |
| Post subject: | Re: Dipstick Seal. |
First thing I checked and changed, its defiantly coming from round the dip stick. |
|
| Author: | rebel2cv [ April 7th, 2011, 12:01 am ] |
| Post subject: | Re: Dipstick Seal. |
Might sound silly, I've always found mine don't go in quite far enough, as the dipstick is slightly too long, I've cut 'about' 5mm off the bottom and it sits a treat in it's seat |
|
| Author: | ken [ April 7th, 2011, 12:16 am ] |
| Post subject: | Re: Dipstick Seal. |
Hmmm.  Hope you've recalibrated the dipstick...  No tin snips or grinders, svp... by slcchassis, on Flickr rebel2cv wrote: Might sound silly, I've always found mine don't go in quite far enough, as the dipstick is slightly too long, I've cut 'about' 5mm off the bottom and it sits a treat in it's seat |
|
| Page 1 of 3 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|