right so after discovering just how much juice my alternator is pumping into the battery it was suggested i checked the state of the reg and adjust if necessary so that's what i did, well i tried to. i had Mr haynes manual out, and i followed the naff instruction, did what i thought was correct, looked and thought that cant be right so returned it to its original state, put it back and onto car. so should be charging 16v or whatever it was before (mentioned in another topic) so all's hunky dory, so thought id try do a voltage check just in case, so i crank up, the battery reading 12.6v before cranking, run engine, still 12.6 (well between .5-7) rev it, just the dame. i had connected all the correct wires back to the reg, etc, alternator is spinning fine but its not pumping juice into the battery
help!!
no idea how to adjust either, took some pics so that they could be of some use
better dust off my push bike 