| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Gear box pinion circlip http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=2029 |
Page 1 of 2 |
| Author: | 2CViking [ August 4th, 2010, 12:37 pm ] |
| Post subject: | Gear box pinion circlip |
Looking for an UK mob to produce these circlips in spring steel. This one is mild steel and can not be reused. Any help is much appreciated Attachment: 1013715.jpg Attachment: pinion.jpg |
|
| Author: | twofifty AZU [ August 4th, 2010, 10:27 pm ] |
| Post subject: | Re: Gear box pinion circlip |
I'd be very surprised if those need reproducing, they're generally used in standard sizes. However that isn't a circlip, that is a snap ring or Eaton ring. It should be available off the shelf. |
|
| Author: | 2CViking [ August 4th, 2010, 10:32 pm ] |
| Post subject: | Re: Gear box pinion circlip |
It is but look at this price http://www.mehariclub.com/segment--a--1013715.html I have plenty old ones but not usable. They expand and don't bounce back |
|
| Author: | twofifty AZU [ August 5th, 2010, 1:42 am ] |
| Post subject: | Re: Gear box pinion circlip |
http://lmgtfy.com/?q=snap+ring%2Beaton |
|
| Author: | Sean [ August 5th, 2010, 7:45 am ] |
| Post subject: | Re: Gear box pinion circlip |
Viking, any chance you can put the vernier on it and give us a few critical dimentions Sean |
|
| Author: | 2CViking [ August 5th, 2010, 10:22 am ] |
| Post subject: | Re: Gear box pinion circlip |
Sean wrote: Viking, any chance you can put the vernier on it and give us a few critical dimentions Sean Thickness, well the old vary from 2.30-2.40-2.50 mm. 2.50 mm would be new, no wear. The groove in the pinion is max 2.80 mm wide. Outside diameter 36.25 mm measured on one ring still on the pinion. The removed rings are much bigger in diameter. Inside diameter. Can't measure correctly but groove on the pinion is 27.80 mm |
|
| Author: | 2CViking [ August 6th, 2010, 11:24 am ] |
| Post subject: | Re: Gear box pinion circlip |
twofifty AZU wrote: http://lmgtfy.com/?q=snap+ring%2Beaton Thanks for the link. Can't find the ring I need. I wonder if any in the UK would have the same rings for sale. The link is for an US firm, most likely impossible to deal with. Cheers Viking |
|
| Author: | Sean [ August 6th, 2010, 7:40 pm ] |
| Post subject: | Re: Gear box pinion circlip |
had a look last night but cant seem to find any of the right thickness yet for what its worth they seem to like the dimention of the shaft (guessed at 30mm) that the groove is in rather than the diameter of the base of the groove. ill have another trawl about later sean |
|
| Author: | 2Cvcruiser [ August 7th, 2010, 1:57 am ] |
| Post subject: | Re: Gear box pinion circlip |
2CVIKING If you want help contacting a US company send me the info and I can contact them next week for you. Jason |
|
| Author: | 2CViking [ August 7th, 2010, 10:32 am ] |
| Post subject: | Re: Gear box pinion circlip |
2Cvcruiser wrote: 2CVIKING If you want help contacting a US company send me the info and I can contact them next week for you. Jason Thanks Jason for your kind offer. Lets see if they can be found in the UK, if not I shall return Cheers Peter |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|