I agree with russ then you could get anything that a "normal" small car would have and personally i don't like smart wheels.
Edit:
i always thought compomotive th could look good on a 2cv
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Hub adaptors http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=1940 |
Page 1 of 4 |
| Author: | JRW_91 [ July 12th, 2010, 12:34 am ] |
| Post subject: | Hub adaptors |
Where could i find wheel hub adaptors? Im thinking about smart car alloys... Ive seen a few on 2cvs n think they dont look too bad! If not slots it is!! |
|
| Author: | Little Louis [ July 12th, 2010, 8:01 am ] |
| Post subject: | Re: Hub adaptors |
got someone to make you some.. |
|
| Author: | Russell [ July 12th, 2010, 8:24 am ] |
| Post subject: | Re: Hub adaptors |
Just my opinion here, but what's the point of making a hub adapter for smart car wheels? They're hardly the most prolific stud pattern around. You're better off getting a set made in 4x100 or even 4x108 which would give you the option of almost any wheel you can find in the European/Japanese market. |
|
| Author: | Little Louis [ July 12th, 2010, 9:06 am ] |
| Post subject: | Re: Hub adaptors |
I agree with russ then you could get anything that a "normal" small car would have and personally i don't like smart wheels. Edit: i always thought compomotive th could look good on a 2cv
|
|
| Author: | samfieldhouse [ July 12th, 2010, 1:31 pm ] |
| Post subject: | Re: Hub adaptors |
i've been told that some companies and/or suppliers are willing to drill the stud pattern for you |
|
| Author: | Little Louis [ July 12th, 2010, 5:25 pm ] |
| Post subject: | Re: Hub adaptors |
compomotive will do that i think but it will probably be expencive |
|
| Author: | Max [ July 12th, 2010, 5:28 pm ] |
| Post subject: | Re: Hub adaptors |
Standard wheels win for me everytime. |
|
| Author: | JRW_91 [ July 12th, 2010, 6:38 pm ] |
| Post subject: | Re: Hub adaptors |
smart car alloys, because the fronts are pretty much the same size as 2cv rims and will fit 135 15's, and i've seen a few, specially some brabus ones that are fitted on another 2cv that dont look too bad! looks like slots it is then 
|
|
| Author: | Neil [ July 12th, 2010, 6:43 pm ] |
| Post subject: | Re: Hub adaptors |
Aren't Smart Brabus rims either 16" or 17"? |
|
| Author: | Russell [ July 12th, 2010, 6:49 pm ] |
| Post subject: | Re: Hub adaptors |
Max wrote: Standard wheels win for me everytime. +1 |
|
| Page 1 of 4 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|