| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Oil pressure gauge http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=1884 |
Page 1 of 1 |
| Author: | 2CViking [ June 28th, 2010, 1:38 pm ] |
| Post subject: | Oil pressure gauge |
Received this lovely old instrument long time ago from a dear friend in Melbourne. Used it today for the first time, an old Dyane arrived with the oil warning lamp on, only at idle. Fitted the gauge but I don't understand kPa. Attachment: P6280510.JPG Attachment: P6280511.JPG |
|
| Author: | ginger bloke [ June 28th, 2010, 3:13 pm ] |
| Post subject: | Re: Oil pressure gauge |
kPa is kilopascals 10kPa equals 1.45 psi so 550kPa = 79.77 psi |
|
| Author: | bertiewhite [ June 28th, 2010, 5:23 pm ] |
| Post subject: | Re: Oil pressure gauge |
ginger bloke wrote: kPa is kilopascals 10kPa equals 1.45 psi so 550kPa = 79.77 psi I seem to remember that 1 bar=14.5 Psi so 1 bar=100Kpa? |
|
| Author: | Russell [ June 28th, 2010, 5:29 pm ] |
| Post subject: | Re: Oil pressure gauge |
http://www.onlineconversion.com/pressure.htm tells us that 550kpa is 79.77 psi |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|