International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
A little wiring question. http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=1484 |
Page 1 of 1 |
Author: | Lenny [ March 19th, 2010, 8:27 pm ] |
Post subject: | A little wiring question. |
I was just looking at my wiring with a view to fitting a reversing light soon. I'd like to route a green wire along the same route as the rest of the loom towards the rear so it looks like a 'factory' job. Looking at the loom where it goes through the front bulkhead there is an extra wire that's not connected to anything: ![]() Does anybody know where this goes to? |
Author: | Tom Duckpower [ March 19th, 2010, 8:32 pm ] |
Post subject: | Re: A little wiring question. |
Maybe the light near the driver side door, for the LHD 2cv's... Think RHD 2cv's have the light on the right side.. |
Author: | ken [ March 19th, 2010, 8:34 pm ] |
Post subject: | Re: A little wiring question. |
Lenny, it goes as far as where an interior light would be on the passenger side of a RHD car. Perhaps Citroen used the same 'front to rear' loom for both LHD & RHD cars, so it's redundant on our cars... ken |
Author: | Lenny [ March 19th, 2010, 8:51 pm ] |
Post subject: | Re: A little wiring question. |
Quote: Lenny, it goes as far as where an interior light would be on the passenger side of a RHD car. Perhaps Citroen used the same 'front to rear' loom for both LHD & RHD cars, so it's redundant on our cars... ken That's brilliant. Perfect for what I was thinking of using it for then. I can carry it on towards the rear of the car and won't have to disturb anything around the bulkhead. Great news, ta very much. ![]() |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |