Today I have refitted my headlamp wires, and wired up the main light switch as it was originally. having read through some of the other threads the next job will be to rid myself of the dim/dip arrangement, but before I do can anyone help with the likely cause of this;-
1/ Brake lights: O/S working, N/S not. Both tail lights are working until I press the brake pedal when the N/S one goes out for as long as the pedal is depressed. All connections are clean, the bulb works, and the colour coded wires on the front to rear harness both at the bulkhead and the rear light all tally.
2/ Headlamps. O/S Headlamps and pilot bulb come on, N/S just the pilot. This happens whatever position the main switch is in other than when in 'L' and pressed down, when just the sidelights come on in that position. Again I've checked the N/S bulb and it's fine. The lights are wired as per this image so appear correct.
I've wired up the main light switch according to notes I made earlier and have since seen something by Ken that confirms that it is correct. You can actually see kens instructions on the floor in this pic!
Photo below: The relays are connected like this, and everything is clean and tight throughout. Will bypassing the relays cure it or should I be looking elsewhere?
