Decided to produce my own pipes. Found the tools in the UK and voila I can now make pipes for all A models including the thicker 4.5mm (Ami 6 pipes etc)
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Brake pipes http://www.international2cvfriends.com/forum/viewtopic.php?f=7&t=1267 |
Page 1 of 1 |
| Author: | 2CViking [ January 30th, 2010, 1:10 pm ] |
| Post subject: | Brake pipes |
Decided to produce my own pipes. Found the tools in the UK and voila I can now make pipes for all A models including the thicker 4.5mm (Ami 6 pipes etc)
|
|
| Author: | Sean [ January 30th, 2010, 1:29 pm ] |
| Post subject: | Re: Brake pipes |
Neat tool and small enough to take on your raid!  wheres it from Pilaedes(sp?) Bonapart...which was sold off. Sean |
|
| Author: | 2CViking [ January 30th, 2010, 1:47 pm ] |
| Post subject: | Re: Brake pipes |
Yes but their web site gone walk about? http://www.pleiades.uk.com/ |
|
| Author: | ken [ January 30th, 2010, 1:53 pm ] |
| Post subject: | Re: Brake pipes |
Reckon the one I've got is over 20 years old by now and still going strong.  Just be careful when winding pipe round a broom handle, to make the rear 'curlies', that the free end of the pipe doesn't get in your eye...  ken |
|
| Author: | 2CViking [ January 30th, 2010, 1:57 pm ] |
| Post subject: | Re: Brake pipes |
ken wrote: Reckon the one I've got is over 20 years old by now and still going strong. Just be careful when winding pipe round a broom handle, to make the rear 'curlies', that the free end of the pipe doesn't get in your eye... ken Do you move over the holding brackets? |
|
| Author: | ken [ January 30th, 2010, 2:13 pm ] |
| Post subject: | Re: Brake pipes |
Yep, they always had to be recycled, even when buying 'ready made' rear pipes from Bonapart in the UK. Prices from the new owners in la belle France seem to have increased dramatically, or is that just £ vs. Euro? ken. Talking of exchange rates, I've got 6,000 DK to shift and the exchange rate for that currency isn't too good either. We seem to lose out whatever happens.  2CViking wrote: Do you move over the holding brackets? |
|
| Author: | 2CViking [ January 30th, 2010, 2:41 pm ] |
| Post subject: | Re: Brake pipes |
ken wrote: Yep, they always had to be recycled, even when buying 'ready made' rear pipes from Bonapart in the UK. Prices from the new owners in la belle France seem to have increased dramatically, or is that just £ vs. Euro? ken. Talking of exchange rates, I've got 6,000 DK to shift and the exchange rate for that currency isn't too good either. We seem to lose out whatever happens. 2CViking wrote: Do you move over the holding brackets? Do you find this expensive. And what is an ex pen sive?  Please explain? Oh no, one more ex plain. Hmm   Part No. Designation Price K/2HDI/LH Ready-made Brake Pipe Set (Left Hand Drive) 89.00 € Part No. Designation Price BP8/27 Caliper to caliper 6.50 € BP8/023 Master cylinder to front 13.20 € BP8/216 Master cylinder to rear 3-way 18.50 € BP8/515/N Left rear 25.60 € BP8/515/O Right rear 25.60 € |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|