http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 293367800;
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| 1220cc Flat-4 Mehari DEATH project started... http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=74 |
Page 6 of 10 |
| Author: | toomany2cvs [ February 8th, 2009, 8:42 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
2cv4x4 wrote: is it possible to put a porsche engine in a 2cv Dead easy in a van or Mehari, and probably not too bad in a Dyane or Ami estate. 2cv's going to be a bit trickier, although you might get it in the roof. Ami saloon'd be impossible, though. |
|
| Author: | toomany2cvs [ March 3rd, 2009, 1:59 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
I've just had a delivery of nice shiny new tupperware... Woo! Add that to the big box of G engine bits in the back of the Saab, and More Things Might Happen soon. |
|
| Author: | Charlotte [ March 4th, 2009, 3:48 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
This project almost makes me like meharis. But not quite.... |
|
| Author: | 4x4 SuperFinn [ March 4th, 2009, 4:14 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
Are you intending to take this to Czech Adrian? If so looks like you've got your work cut out... Top tip I remember from my GS powered Acdyane. Park outside someone elses house as the engine had a tendency to leak oil!! |
|
| Author: | toomany2cvs [ March 4th, 2009, 4:17 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
4x4 SuperFinn wrote: Are you intending to take this to Czech Adrian? Such is the plan. Ellie's even agreed to it in theory. Quote: If so looks like you've got your work cut out... Just keep your eyes open at the WM. For a certain 'gooner with red roof... <g> Quote: Top tip I remember from my GS powered Acdyane. Park outside someone elses house as the engine had a tendency to leak oil!! That's OK, it'll just add to the Saab's territorial markings |
|
| Author: | toomany2cvs [ April 9th, 2009, 11:17 am ] |
| Post subject: | A trip to the shoe shop for a fitting |
...has been averted, through the joys of fleaBay... A tenner doesn't seem much to be sure if 175/65 tyres off a Mini will actually fit or not... http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0302367981 I've swapped the G alloys for a set of G steels - the ones that look a little like Ami Super rims, but wider and with a large centre hole. So - chuck that rubber onto one of the rims, and see whether they fit onto the car. |
|
| Author: | Joolz [ April 11th, 2009, 11:36 pm ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
| http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 293367800;
|
|
| Author: | toomany2cvs [ April 12th, 2009, 9:45 am ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
Joolz wrote: ;)http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 293367800; Even if it closes at that price, I'm a bit more than six quid's worth of petrol further from South Wales than Stevenage... Anyway, the other one's in the boot of the Saab at the mo. Blimey, that's one HEAVY tyre. |
|
| Author: | toomany2cvs [ April 20th, 2009, 7:46 pm ] |
| Post subject: | Re: A trip to the shoe shop for a fitting |
toomany2cvs wrote: So - chuck that rubber onto one of the rims, and see whether they fit onto the car. Let's hope they fit, because they look the dog's...  
|
|
| Author: | meshking [ April 21st, 2009, 7:58 am ] |
| Post subject: | Re: 1220cc Flat-4 Mehari DEATH project started... |
You going to be making some adapters there then, Adrian? Or just using three of the six holes 
|
|
| Page 6 of 10 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|