International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Rust Rot Excessive http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=6366 |
Page 1 of 3 |
Author: | subarupete [ May 29th, 2021, 2:25 pm ] |
Post subject: | Re: Rust Rot Excessive |
Markout the GOOD metal to be removed... |
Author: | subarupete [ May 30th, 2021, 12:03 pm ] |
Post subject: | Re: Rust Rot Excessive |
Added some good Zintec to the hole with some average welds |
Author: | rob massey55 [ May 31st, 2021, 6:26 pm ] |
Post subject: | Re: Rust Rot Excessive |
all good stuff Pete, Ive been excavating some of the rusty stuff as well. |
Author: | subarupete [ June 4th, 2021, 10:11 am ] |
Post subject: | Re: Rust Rot Excessive |
Yet another large hole, this time in the boot. |
Author: | AZL57 [ June 4th, 2021, 4:25 pm ] |
Post subject: | Re: Rust Rot Excessive |
The holes have an advantage, they won't rust... |
Author: | subarupete [ June 4th, 2021, 4:43 pm ] |
Post subject: | Re: Rust Rot Excessive |
also less kg that is until it, gets filled in with more metal than was removed |
Author: | rob massey55 [ June 6th, 2021, 10:06 pm ] |
Post subject: | Re: Rust Rot Excessive |
I can see that you've been paying attention . AZL57 wrote: The holes have an advantage, they won't rust... |
Author: | Roger V [ June 7th, 2021, 6:10 pm ] |
Post subject: | Re: Rust Rot Excessive |
You have to let the rain water out some how! |
Author: | subarupete [ June 9th, 2021, 4:48 pm ] |
Post subject: | Re: Rust Rot Excessive |
Covered with Primer and Seam Sealer looks reasonable Added a kg or Two as the metal is 1.5mm where as the original is 1.2mm or less. |
Page 1 of 3 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |