As long as it does the job
.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| My Beduino http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=6044 |
Page 9 of 34 |
| Author: | rob massey55 [ August 30th, 2018, 7:24 pm ] |
| Post subject: | Re: My Beduino |
As long as it does the job .
|
|
| Author: | Roger V [ August 30th, 2018, 9:29 pm ] | ||
| Post subject: | Re: My Beduino | ||
|
|||
| Author: | Roger V [ September 1st, 2018, 8:56 pm ] |
| Post subject: | Re: My Beduino |
The dashboard air vent is in poor condition, so I guess I'm gonna need a replacement. Late 2CV type, are they the same on left and right, or are they handed? |
|
| Author: | ken [ September 1st, 2018, 9:49 pm ] |
| Post subject: | Re: My Beduino |
Crikey, that heating/demisting setups is rather Spartan, Roger, with just one demister on the driver's side. Are you sure you don't want some 2CV type bulkhead inlets chopped out of a scrap car, so they'd be switchable between 'demist' and 'heat to floor area'? Roger V wrote: The dashboard air vent is in poor condition, so I guess I'm gonna need a replacement. Late 2CV type, are they the same on left and right, or are they handed? |
|
| Author: | Roger V [ September 1st, 2018, 10:29 pm ] |
| Post subject: | Re: My Beduino |
Ken, that's exactly what I would like. 
|
|
| Author: | Roger V [ September 11th, 2018, 1:57 pm ] |
| Post subject: | Re: My Beduino |
In amongst all the other things I haven't finished yet, I'm thinking of making a mechanism to enable me to tip the whole wings/bonnet section forward. I'm looking for ideas into a quick release mechanism for the with GS to body area.
|
|
| Author: | subarupete [ September 11th, 2018, 4:51 pm ] |
| Post subject: | Re: My Beduino |
Possible solution http://www.cats-citroen.com/citroen_2cv ... iptop.html |
|
| Author: | Roger V [ September 11th, 2018, 5:29 pm ] |
| Post subject: | Re: My Beduino |
That's cool The hinge and joining panels I'm ok with. Its a quick release for opening the bonnet I'm having trouble visualising. Currently, each wing is attached to the bulkhead with 4 nuts and bolts. You can see the holes in the last image. |
|
| Author: | AZL57 [ September 12th, 2018, 5:21 pm ] |
| Post subject: | Re: My Beduino |
You might use an lock from an Renault r4. All electrics can be connected with an 13 pole caravan plug. |
|
| Author: | Roger V [ September 12th, 2018, 5:33 pm ] |
| Post subject: | Re: My Beduino |
Sounds complex! Has to be simple for me to do it.  I've ordered a pair of these button thingies. https://m.ebay.co.uk/itm/Quick-Release- ... %7Ciid%3A1 |
|
| Page 9 of 34 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|