International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
My Beduino http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=6044 |
Page 8 of 34 |
Author: | Roger V [ July 5th, 2018, 9:33 pm ] |
Post subject: | Re: My Beduino |
That's a good tip. Thanks, I'll try it. Edit It already has new wire, buts worth blowing the pipe out. |
Author: | Roger V [ July 10th, 2018, 11:00 am ] |
Post subject: | Re: My Beduino |
Its been so hot! I didn't go t'farm on Thursday and Friday as I was hot and thought it would be a good idea not to disturb the paint. It was the local classic car show at Powderham Castle over the weekend, and I ended up staying and doing some quality control on the cider they had in the beer tent. Awesome weekend. |
Author: | Roger V [ August 12th, 2018, 10:43 pm ] |
Post subject: | Re: My Beduino |
Some good progress on the Shed recently. The floor subframe is painted and the new rear floor is back down. Front floor is cleaned up, patched and painted. Currently in the process of replacing the steering rack, arms and hubs with ones I bought at the national last year. Going out tomorrow to see if I can find a 3/4 drive socket for the drive shaft nuts. |
Author: | Roger V [ August 27th, 2018, 11:37 am ] |
Post subject: | Re: My Beduino |
I had to order a 3/4 drive 32mm socket for drive shaft nuts, but there off now. New rack being rebuilt and installed today I hope. |
Author: | Roger V [ August 28th, 2018, 8:58 am ] |
Post subject: | Re: My Beduino |
The replacement rack is rebuilt and installed. Plan to replace the arms today, but need to install the rubber stops first as they were missing! These should arrive today along with a variety of goodies from ECAS. Goodies include M7 bolts to attach handbrake mechanism. This was bolted before, but had M6 bolts with nuts through the capture nuts on the chassis. I'm going to need to get the large castle nuts that hold the arm on lightened correctly and I don't have the correct tool. Any tips please. |
Author: | rob massey55 [ August 28th, 2018, 9:21 am ] |
Post subject: | Re: My Beduino |
IMG_2889 by Robndaisy, on Flickr IMG_2891 by Robndaisy, on Flickr Doesn't have to be as complicated as this^^, just enough pegs like this https://www.ecas2cvparts.co.uk/suspensi ... 7cacbdc49b to engage and a suitable nut or old socket welded on for your torque wrench. |
Author: | Roger V [ August 28th, 2018, 10:35 am ] |
Post subject: | Re: My Beduino |
Thanks Rob I'll have a nosey around the farm workshop to see what I can come up with. If I recall, I saw a box of oil filter removers. Perhaps I can adapt one. |
Author: | Roger V [ August 29th, 2018, 9:00 am ] |
Post subject: | Re: My Beduino |
I've ordered some 70mm tube. |
Author: | rob massey55 [ August 30th, 2018, 6:41 am ] |
Post subject: | Re: My Beduino |
Shows commitment . Look forward to seeing the finished article. |
Author: | Roger V [ August 30th, 2018, 10:47 am ] |
Post subject: | Re: My Beduino |
I wonder if it will be the elegant tool I envisage, or a bodge. |
Page 8 of 34 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |