International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
My Beduino http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=6044 |
Page 17 of 34 |
Author: | Geert [ March 10th, 2019, 8:23 am ] |
Post subject: | Re: My Beduino |
I once was at a farm in the West Midlands. This farmer kept his spare tools in several rabbit hutches, spread all over the farm, so he never was far away from tools . |
Author: | Roger V [ March 10th, 2019, 9:27 am ] |
Post subject: | Re: My Beduino |
My friend does take that approach, but without the rabbit hutches. There are sets of spanners and Allen keys at specific buildings. However, we all prefer to use our favourite tools. This was an electrical project, and though I had the big box of fittings, I left my crimper at T'farm. You,can't double up everything. |
Author: | AZL57 [ March 23rd, 2019, 7:00 pm ] |
Post subject: | Re: My Beduino |
Close the side up and make a van of it. Or punt an large plexiglass sheet over all the side? |
Author: | Roger V [ March 23rd, 2019, 8:39 pm ] |
Post subject: | Re: My Beduino |
I fall out of love with the Shed occasionally. I've made a template for cutting the seal. Angles are 110 and 70. So I new to cut them at 55 and 35 degrees. Gotta keep the inside inside, and the outside outside. Does my head in. |
Author: | Roger V [ March 23rd, 2019, 8:59 pm ] |
Post subject: | Re: My Beduino |
AZL57 I like your thinking, with I had that idea before I bought the seals. Still, it will look awesome when I've done it. Just gotta keep telling myself that. |
Author: | Roger V [ March 25th, 2019, 9:25 pm ] |
Post subject: | Re: My Beduino |
Damn, I hate these windows. So! Its measure once and cut twice!!!! |
Author: | Roger V [ March 29th, 2019, 7:17 pm ] | ||
Post subject: | Re: My Beduino | ||
I had a trigger wheel machined into the flywheel. Both the engineer and I are both on a learning curve here, so we will see how it works out.
|
Author: | ken [ March 29th, 2019, 7:47 pm ] |
Post subject: | Re: My Beduino |
Rebalanced afterwards? |
Author: | lpgo [ March 29th, 2019, 9:48 pm ] |
Post subject: | Re: My Beduino |
Roger V wrote: I had a trigger wheel machined into the flywheel. Both the engineer and I are both on a learning curve here, so we will see how it works out. 60-2? |
Page 17 of 34 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |