International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
My Beduino http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=6044 |
Page 16 of 34 |
Author: | ken [ February 27th, 2019, 12:56 am ] |
Post subject: | Re: My Beduino |
Yep, although I've never managed to work to a 'zero tolerance' setting, however 17mm to 18mm seems to have been adequate... Roger V wrote: Thanks Ken, much appreciated. Should I leave the float height at 18mm |
Author: | Roger V [ March 2nd, 2019, 11:48 pm ] | ||
Post subject: | Re: My Beduino | ||
Picked a pair of recliners. Couldn't say no at £20
|
Author: | rob massey55 [ March 3rd, 2019, 9:09 am ] |
Post subject: | Re: My Beduino |
Pimping it are we? |
Author: | Geert [ March 3rd, 2019, 9:11 am ] |
Post subject: | Re: My Beduino |
very comfy |
Author: | Roger V [ March 3rd, 2019, 11:50 am ] |
Post subject: | Re: My Beduino |
A bit firmer than I would prefer, but its possible that they are a bit to low. I will probably need to put some box steel in and most likely move them to the middle a little. |
Author: | Geert [ March 3rd, 2019, 5:29 pm ] |
Post subject: | Re: My Beduino |
There was a time this was sufficient : http://mooiegoedkopefruitkisten.nl/wp-c ... /04/7c.jpg |
Author: | Roger V [ March 5th, 2019, 11:39 pm ] |
Post subject: | Re: My Beduino |
As previously indicated, I also have a 21-24 carb. Anyone know if this carb has any benefits over the 18-26? Eg less acceleration, but better economy! I notice the top does not have the choke pull off feature. Is the top a retro fit for the 18-26, as that would be nice. |
Author: | Roger V [ March 9th, 2019, 8:32 pm ] |
Post subject: | Re: My Beduino |
So annoying when the Shedouin is outside my flat and there are little jobs I want to do, but my tools are 20 miles away at T'farm. |
Author: | AZL57 [ March 9th, 2019, 11:20 pm ] |
Post subject: | Re: My Beduino |
So go to a boot sale and get some spare tools |
Author: | Roger V [ March 9th, 2019, 11:23 pm ] |
Post subject: | Re: My Beduino |
Lol, I probably have spare tools, and they were at T'farm as well. I need a sort out. |
Page 16 of 34 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |