International2cvFriends.com
http://www.international2cvfriends.com/forum/

New Project - 1966 Ami 6 Break
http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5781		 Page 1 of 1
Author:  Nelsthebass [ March 19th, 2016, 8:51 pm ]
Post subject:  New Project - 1966 Ami 6 Break
Oh Shit! Done it again, gone and bought an old Ami Break and due to collect tomorrow - watch this space as Scooba Steve may well be back on!
Author:  subarupete [ March 20th, 2016, 6:04 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Any pics yet?
Author:  Nelsthebass [ March 20th, 2016, 8:18 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
https://scontent-ams3-1.xx.fbcdn.net/hp ... 7912_o.jpg
Author:  ken [ March 20th, 2016, 8:25 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Thought I recognised it, Jon Jolly's workhorse.
He's kept the shiny one... ;)


Nelsthebass wrote:
https://scontent-ams3-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12419240_10153925059128346_1345261545755087912_o.jpg
Author:  Nelsthebass [ March 20th, 2016, 9:23 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Correct! The M4 is veeeery slow uphills which is why I have been asking about M28 heads etc - can you swop out an M4 directly for an M28 without much issue with the gearbox?
Author:  lpgo [ March 20th, 2016, 9:55 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Nelsthebass wrote:
Correct! The M4 is veeeery slow uphills which is why I have been asking about M28 heads etc - can you swop out an M4 directly for an M28 without much issue with the gearbox?


A good M4 must be almost equal to an M28, at low rpm a good M4 outruns the M28.. Only at topspeed the M28 suddenly awakes...

It should work fine as long as you use the M4 clutchplate... and you need an old 3 finger clutchhouse...
Author:  Geert [ March 20th, 2016, 11:02 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Nelsthebass wrote:
https://scontent-ams3-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12419240_10153925059128346_1345261545755087912_o.jpg

What a beauty !
Author:  Tom Duckpower [ March 21st, 2016, 10:31 am ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Loving the gradalux!
Author:  Ianredspecial [ March 21st, 2016, 12:10 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Way cool.
Author:  Nelsthebass [ March 25th, 2016, 8:27 pm ]
Post subject:  Re: New Project - 1966 Ami 6 Break
Well spent all afternoon tinkering with the beast - wheels and blind are now a pleasing shade of black, fitted points assist and re-timed it and adjusted brakes so it now goes and stops really well - greased the greasy bits and splashed an amount of Kurust on the parts that shouldn't be rat look. Door locks and seat rubbers tomorrow - will post some more pics then....
Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/