| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Van repairs http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5707 |
Page 7 of 78 |
| Author: | rob massey55 [ March 11th, 2017, 8:54 pm ] |
| Post subject: | Re: Van repairs |
 P1000916 by Robndaisy, on Flickr P1000917 by Robndaisy, on FlickrReady to go back on.  P1000918 by Robndaisy, on Flickr P1000919 by Robndaisy, on Flickrall those copper washers and the pipe nut, if it doesn't leak 'twill be a miracle!  P1000920 by Robndaisy, on FlickrIntermediate crossmember sits between pipe and crosstube.  P1000922 by Robndaisy, on Flickrfinally locked the nut on the repaired frotteur and fitted it, nice to feel considerable resistance. |
|
| Author: | rob massey55 [ March 12th, 2017, 9:35 pm ] |
| Post subject: | Re: Van repairs |
 P1000923 by Robndaisy, on FlickrFront Batteur back on, the book says 43 lbft. but with all the copper grease I did 30. Fitted the other front and a rear one then had to jump in the Charleston and go to the beach via Machynlleth. a great run out and back on quiet mountain roads in Spring sunlight, just what we both needed  . Winter seems to be over.
|
|
| Author: | AZL57 [ March 12th, 2017, 11:07 pm ] |
| Post subject: | Re: Van repairs |
I have them too all those connections with copper washers. After the rebuild just check all connections. I had one or two that had a drip of brake fluid on them but after thightening it stayed dry the last 20 years 
|
|
| Author: | rob massey55 [ March 19th, 2017, 10:22 pm ] |
| Post subject: | Re: Van repairs |
Cheers, I'll inspect it when it's back on the road  when ever that is! P1000924 by Robndaisy, on Flickr P1000934 by Robndaisy, on Flickr P1000933 by Robndaisy, on FlickrIt will remain on these until I buy tyres, after it's rewired and the gearbox/engine have been worked on. I'm using pipe lagging(Denso) tape for a body gasket because it's recommended(or I'm being set up!). Lowered the bodyshell off the high stands and just above the chassis. Will use jacks to manoeuvre and line everything up(I hope).  P1000936 by Robndaisy, on Flickr P1000938 by Robndaisy, on Flickr P1000937 by Robndaisy, on FlickrThere will be a bracket over the top and down the sides of the sills, I haven't made it yet, ran out of Argon 
|
|
| Author: | rob massey55 [ March 25th, 2017, 2:32 pm ] |
| Post subject: | Re: Van repairs |
 P1000947 by Robndaisy, on Flickr P1000946 by Robndaisy, on Flickr P1000959 by Robndaisy, on Flickr P1000956 by Robndaisy, on Flickr P1000957 by Robndaisy, on Flickr P1000961 by Robndaisy, on Flickr P1000963 by Robndaisy, on FlickrChassis and bodyshell reunited
|
|
| Author: | rob massey55 [ April 24th, 2017, 9:20 pm ] |
| Post subject: | Re: Van repairs |
Plenty to get on with.  P1000979 by Robndaisy, on Flickr P1000980 by Robndaisy, on Flickr P1000969 by Robndaisy, on Flickr P1000973 by Robndaisy, on Flickr P1010007 by Robndaisy, on Flickr P1010004 by Robndaisy, on Flickr P1010011 by Robndaisy, on Flickr P1010014 by Robndaisy, on Flickr P1010015 by Robndaisy, on FlickrAll these weren't helping much,  [url=https://flic.kr/p/TjVDXG]P1010018[/url] by Robndaisy, on Flickr These were the ones I needed!  P1010024 by Robndaisy, on FlickrPlus the brazing torch.  P1000241 by Robndaisy, on Flickr P1010026 by Robndaisy, on FlickrNeed to sort out a front bumper and then the front wings 
|
|
| Author: | subarupete [ April 25th, 2017, 8:28 am ] |
| Post subject: | Re: Van repairs |
Whats in the Russian Box?? |
|
| Author: | AZS [ April 25th, 2017, 1:22 pm ] |
| Post subject: | Re: Van repairs |
subarupete wrote: Whats in the Russian Box?? binocular and a mic
|
|
| Author: | rob massey55 [ April 25th, 2017, 7:52 pm ] |
| Post subject: | Re: Van repairs |
Oh just something Putin left me, last time he called in. |
|
| Author: | rob massey55 [ April 26th, 2017, 8:01 pm ] |
| Post subject: | Re: Van repairs |
No bumper with the van, how about something similar to this, if I can knock it up? https://www.flickr.com/photos/sandertoonen/12349625874 |
|
| Page 7 of 78 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|