It won't tear, just as long as you take things steady and use a Stanley knife blade to ease/tease the gasket away from the carburettor body...
rob massey55 wrote:
If I were to take the top of the carb. and the gasket tears, what then?
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Van repairs http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5707 |
Page 21 of 78 |
| Author: | ken [ January 13th, 2018, 12:13 am ] |
| Post subject: | Re: Van repairs |
It won't tear, just as long as you take things steady and use a Stanley knife blade to ease/tease the gasket away from the carburettor body... rob massey55 wrote: If I were to take the top of the carb. and the gasket tears, what then? |
|
| Author: | rob massey55 [ January 13th, 2018, 9:50 am ] |
| Post subject: | Re: Van repairs |
Fair enough, I'll ask Pete to bring Stanley to the party. |
|
| Author: | AZL57 [ January 13th, 2018, 11:24 am ] |
| Post subject: | Re: Van repairs |
Yes plus from the battery and mass wire somewhere to the metal of the engine or gearbox. If you want to stop just pull one af the connectors of the coil. Not the sparkplug leads....
|
|
| Author: | rob massey55 [ January 13th, 2018, 9:37 pm ] |
| Post subject: | Re: Van repairs |
Ran it today at 6.30 pm. video tomorrow?.Sounds nice, such a relief, well happy 
|
|
| Author: | Roger V [ January 14th, 2018, 10:33 am ] |
| Post subject: | Re: Van repairs |
Yay
|
|
| Author: | AZL57 [ January 14th, 2018, 10:22 pm ] |
| Post subject: | Re: Van repairs |
Well done |
|
| Author: | rob massey55 [ January 15th, 2018, 1:39 pm ] |
| Post subject: | Re: Van repairs |
https://www.youtube.com/watch?v=ysOnHH2dr3U https://www.youtube.com/watch?v=jAaApR72SkE Thought things were too good to last! |
|
| Author: | subarupete [ January 15th, 2018, 2:31 pm ] |
| Post subject: | Re: Van repairs |
Sounds sweet, brill "bit" of work. |
|
| Author: | rob massey55 [ January 15th, 2018, 10:58 pm ] |
| Post subject: | Re: Van repairs |
So, Head off, light shone down the pushrod tubes in the dark(easy at this time of year) and the pinholes blazing like little flamin' beacons. What is the way to mend them?  P1010555 by Robndaisy, on Flickr P1010556 by Robndaisy, on FlickrDon't know why I didn't spot this before  .
|
|
| Author: | Roger V [ January 15th, 2018, 11:26 pm ] |
| Post subject: | Re: Van repairs |
How would epoxy glue fare? Would it stand the expansion/contraction and the oil? |
|
| Page 21 of 78 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|