| Author |
Message |
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
 Re: Van repairs  P1010035 by Robndaisy, on Flickr  P1010036 by Robndaisy, on Flickr  P1010048_LI by Robndaisy, on Flickr There will be more holding the green tube than just one 7mm. bolt!  P1010057 by Robndaisy, on Flickr  P1010056 by Robndaisy, on Flickr  P1010058 by Robndaisy, on Flickr Is it long enough?   P1010060 by Robndaisy, on Flickr Need to repair the wings before bending the ends. Started brazing but oxygen gauge went kaput, time for a beer.
|
| May 10th, 2017, 10:17 pm |
|
|
|
Roger V
Firing on two.
Joined: March 21st, 2013, 12:04 am
Posts: 1581
Location: Exeter, Devon
|
Re: Van repairs Beer will help. 
_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....
|
| May 10th, 2017, 10:58 pm |
|
|
|
ken
Agony Aunt - You have a car problem? Speak to Ken
Joined: March 6th, 2009, 1:40 am
Posts: 3675
|
Re: Van repairs Have you opted for the Dali reference, Rob...  rob massey55 wrote: There will be more holding the green tube than just one 7mm. bolt! P1010058 by Robndaisy, on Flickr Is it long enough?
_________________
|
| May 10th, 2017, 11:00 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs  when I've finally completed the repairs and maybe look back, I guess it will at times seem surreal.
|
| May 11th, 2017, 1:42 am |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs No further on with Dali's moustache but have managed to get the front wings brazed, very rough but suprisingly solid again!  P1010062 by Robndaisy, on Flickr Been done before by someone.  P1010063 by Robndaisy, on Flickr  P1010064 by Robndaisy, on Flickr  P1010067 by Robndaisy, on Flickr  P1010069 by Robndaisy, on Flickr  P1010068 by Robndaisy, on Flickr  P1010070 by Robndaisy, on Flickr  P1010071 by Robndaisy, on Flickr Not pretty but in the spirit of the project, which is to get the van's bodyshell etc. solid. It took a long time but now I'll be able to bend the bumper ends and trim the tube before welding in situ.  P1010072 by Robndaisy, on Flickr Back to work tomorrow but for now...
|
| May 14th, 2017, 8:51 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: Van repairs cheers !
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| May 14th, 2017, 9:19 pm |
|
|
|
AZL57
Firing on two.
Joined: October 22nd, 2014, 10:59 pm
Posts: 2007
Location: South-Limburg
|
Re: Van repairs front bumper is not v-shaped but curved all the way and a bit more to the edges of wings.
|
| May 15th, 2017, 8:21 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2146
Location: Near Monmouth
|
Re: Van repairs Attachment:
ak6145e.jpg [ 20.96 KiB | Viewed 6661 times ]
|
| May 15th, 2017, 10:18 am |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs Fair enough, a PO bumper is like that but this isn't a PO bumper because I don't want it to sit so far forward on extended brackets. If it was an offroad van maybe It won't need the skid plate either, not with 12 hp to play with .
|
| May 15th, 2017, 7:06 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs
|
| May 17th, 2017, 7:39 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 131 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
