| Author |
Message |
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
 Re: Van repairs 2cvkeza wrote: Peter... AZU has shorter chassis so back crossmember is higher than AK... Ya that is what I meant. Properly didn't explain correctly
_________________
|
| September 3rd, 2015, 12:38 pm |
 
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs 2cvkeza wrote: rob massey55 ... I just looked at your van pictures there at Flickr... "crist" ... looks like big job at that AZU ...  For cars like this I produce and assembly complete back bed ... It is AK350 on photo but I do assembly AZU, 250 and Acadiane sets as well... Ask Roy ECAS for some more AZU panels... like 2. and 3. crossmember, side B post panels and inner wings. It will be easyer for you to rebuild this AZU completly with my panels... Why don't you come over here with your bits and do the flamer for me 
|
| September 3rd, 2015, 5:51 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs The correct valence/fascia panel/beam arrives.  IMG_3120 by Robndaisy, on Flickr  IMG_3121 by Robndaisy, on Flickr it fits perfectly, just need to get going with the pop riveter now.
|
| September 19th, 2015, 7:38 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs The original floor was swaged so the corrugations blended flush to the front and rear crossmembers. this replacement doesn't, any easy, neat ideas?  IMG_3849 by Robndaisy, on Flickr
|
| May 21st, 2016, 5:07 pm |
|
|
|
Nelsthebass
Firing on two.
Joined: October 5th, 2009, 8:22 pm
Posts: 1415
Location: Stone, Staffs
|
Re: Van repairs Big hammer?
_________________
1987 2CV Special
2014 Suzuki Swift Sport
2015 Lexus NX300h
1966 Ami Break
|
| May 21st, 2016, 5:35 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs subtle as usual
|
| May 21st, 2016, 7:44 pm |
|
|
|
Nelsthebass
Firing on two.
Joined: October 5th, 2009, 8:22 pm
Posts: 1415
Location: Stone, Staffs
|
Re: Van repairs Subtle and me are strange bedfellows......
_________________
1987 2CV Special
2014 Suzuki Swift Sport
2015 Lexus NX300h
1966 Ami Break
|
| May 21st, 2016, 7:58 pm |
|
|
|
2cvkeza
Firing on two.
Joined: February 11th, 2010, 11:36 am
Posts: 602
Location: Slovenia
|
Re: Van repairs Yes, end of this corrugated floor is not same as original... There is good reason for this. As (and this is my product) it is made in yearly batch of 10 - 15 pieces it cant be made by presing on big expensive presses and tools. But , as it is made by CNC the corrugations and dimensions are very good and as original as possible.
I am not at workshop computer so I cant give you photo of how it is fitted... Have to wait until Monday... But, You can drill 4 - 5 mm holes on every bottom part of corrugations about 10 mm from the end. Than tuck weld it with MIG , grind all tuck welds. Than hammer down slowly every upper part of corrugates.
If you do this slowly with right amount of force and time you will end up with something looking like original.
And... I done it many times and it is 1/2 hour job for both sides of floor.
cheers
_________________
www.2cvkeza.com
|
| May 21st, 2016, 9:00 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs Thanks very much, I'll have a go and if I get it right I 'll post pix.
Beautiful panel, fits nice.
|
| May 22nd, 2016, 8:23 pm |
|
|
|
Rusty
Firing on two.
Joined: January 12th, 2010, 10:33 am
Posts: 193
Location: Koudekerk ad Rijn, Netherlands
|
Re: Van repairs DREWL ! new stuff! nice job!
_________________
bitten by the Citobug...
|
| May 23rd, 2016, 8:40 am |
|
|
Who is online |
Users browsing this forum: No registered users and 123 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
