| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| 2CV 602ccm 1974 http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5588 |
Page 2 of 3 |
| Author: | Russell [ March 18th, 2015, 10:47 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
You don't have to worry too much about breaking the glass on those windows, it's almost impossible to smash them. Ive dropped them on the floor when fitting them before. |
|
| Author: | AZL57 [ March 19th, 2015, 6:16 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
I tried to get one out of a car we were scrapping The sidepanels were laying flat on the ground and even jumping on the glass didn't do anything. We couldn't get the glass out. The car was from 1967 er repainted by hand several times so i think the paint will have gone between the rubber and the body... 
|
|
| Author: | Vasil Ami [ March 19th, 2015, 9:30 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
after talking to a friend of mine,he said to grease or oil the rubber from the outside and then they will slide in easier and the oil will protect the inside of the panel from rust. He's got a point there
|
|
| Author: | Russell [ March 19th, 2015, 9:38 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
Use Vaseline or similar, grease or oil will make the rubber expand. I use a squirty bottle with washing up liquid and water in although people do say that isn't ideal either. |
|
| Author: | AZL57 [ March 19th, 2015, 10:23 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
tectyl can be used it's a bit dirty job but it works. |
|
| Author: | citroenboat [ March 20th, 2015, 2:23 am ] |
| Post subject: | Re: 2CV 602ccm 1974 |
I use waxoyl for putting tyres on rims & window rubbers in, nice & slippery, anti rust & don't seem to affect the rubber. I believe washing up liquid has a hefty dose of salt in it... |
|
| Author: | Vasil Ami [ March 22nd, 2015, 11:01 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
Today i didi a little brake work Brake cilinders cleaned off  lubricated with special grease Vaseline mixed with graphit paste,it's spouse to keep the DOT rings in a healfy condition 
|
|
| Author: | ken [ March 22nd, 2015, 11:25 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
Hi Vasil, that's interesting, I've always used red rubber grease when rebuilding drum brake systems... http://www.redrubbergrease.com/ |
|
| Author: | Vasil Ami [ May 3rd, 2015, 11:50 pm ] |
| Post subject: | Re: 2CV 602ccm 1974 |
Washed and almost like new now    
|
|
| Author: | AZL57 [ May 4th, 2015, 7:56 am ] |
| Post subject: | Re: 2CV 602ccm 1974 |
Nice contrast with the steering wheel  Are those AZAM rear windows original? |
|
| Page 2 of 3 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|