International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
The Grey Nurse http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5262 |
Page 2 of 4 |
Author: | Pony [ June 20th, 2014, 9:22 pm ] |
Post subject: | Re: The Grey Nurse |
Nice as a note i normally fit up all my floors and sills on a donor chassis to get it right!! there is a great chance the front end will drop if this is not done as the shells are normally sprung into position when spot welded at the factory More over it ensures the new floors and toe board holes fit correctly!! pony |
Author: | lpgo [ June 21st, 2014, 8:34 am ] |
Post subject: | Re: The Grey Nurse |
Pony wrote: Nice as a note i normally fit up all my floors and sills on a donor chassis to get it right!! there is a great chance the front end will drop if this is not done as the shells are normally sprung into position when spot welded at the factory More over it ensures the new floors and toe board holes fit correctly!! pony Same over here..... |
Author: | Harley [ June 23rd, 2014, 3:17 am ] |
Post subject: | Re: The Grey Nurse |
Pony wrote: Nice as a note i normally fit up all my floors and sills on a donor chassis to get it right!! there is a great chance the front end will drop if this is not done as the shells are normally sprung into position when spot welded at the factory More over it ensures the new floors and toe board holes fit correctly!! pony Ahh, I see; No donor chassis here, I'm thinking I will run some steel along the bottom or the body to use as a straight edge... Cheers, Harley |
Author: | lpgo [ June 23rd, 2014, 7:31 am ] |
Post subject: | Re: The Grey Nurse |
ok. must be living in my own world.... but why don't you use the original chassis????????????????? Put the body on; fixate the body at the boot with 2 screws, put in the 2 last screws at the rearbench.Take the new bulkhead put in the 2 screws to fixate that, put in the floors and fixate them with the screws and nothing can go wrong...... If you don't put it on a chassis and you're just a few mm off your screwed..... Cheers Geo... |
Author: | Pony [ June 23rd, 2014, 8:43 pm ] |
Post subject: | Re: The Grey Nurse |
Most chassis here are so badly rusted and bent they would not support a body shell for renovation!! But i do have a new jig chassis at my shop for such jobs! |
Author: | Harley [ June 25th, 2014, 5:49 pm ] |
Post subject: | Re: The Grey Nurse |
I took the advice from the pros Now where's that grinder... Harley |
Author: | lpgo [ June 25th, 2014, 10:01 pm ] |
Post subject: | Re: The Grey Nurse |
Why don't you miror the picture it's much easier |
Author: | citroenboat [ June 26th, 2014, 7:24 am ] |
Post subject: | Re: The Grey Nurse |
Its a shark cork hat man! |
Author: | Ian [ June 26th, 2014, 3:22 pm ] |
Post subject: | Re: The Grey Nurse |
Or a $100 note? |
Page 2 of 4 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |