International2cvFriends.com
http://www.international2cvfriends.com/forum/

AZS modified
http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5172
Page 2 of 3

Author:  Russell [ March 12th, 2014, 9:55 am ]
Post subject:  Re: AZS modified

I put the camera in front of the back axle and held each rear leg and wobbled. Engine not running on account of all the wiring and battery still on the bodyshell.

Author:  AZS [ March 31st, 2014, 12:56 pm ]
Post subject:  Re: AZS modified

Snsmrbrt wrote:
Wondering if this is the same AZS I owned in the 1980s? Was rose grey with reg DAC....J I think! It's name Piaf was painted on the boot lid.
Rob Sansome


Originally this car was red, before painted black.
As far as i know it spent all of it's life in the Netherlands.

Author:  AZS [ April 7th, 2014, 6:27 pm ]
Post subject:  Re: AZS modified

Some older pictures.
Hydraulics and pneumatics are basically working now.
Now working on modifications to get everything else fitted again.

Attachments:
File comment: 2 cylinder boxer air power, not sure if i'll use this one, because of the weight.
1920193_456508047782113_1015151014_n.jpg
1920193_456508047782113_1015151014_n.jpg [ 84.96 KiB | Viewed 5944 times ]
1959232_456507177782200_2129753403_n.jpg
1959232_456507177782200_2129753403_n.jpg [ 111.64 KiB | Viewed 5944 times ]
1622804_456510654448519_334922678_n.jpg
1622804_456510654448519_334922678_n.jpg [ 83.71 KiB | Viewed 5944 times ]

Author:  Neil [ April 7th, 2014, 9:10 pm ]
Post subject:  Re: AZS modified

Nice!

Author:  AZS [ April 10th, 2014, 1:42 pm ]
Post subject:  Re: AZS modified

modified the cooling tunnel to be able to mount the engine 24mm lower in chassis

Attachments:
1688072_468945856538332_3648397459871656435_n.jpg
1688072_468945856538332_3648397459871656435_n.jpg [ 119.56 KiB | Viewed 5893 times ]

Author:  AZS [ April 17th, 2014, 8:24 pm ]
Post subject:  Re: AZS modified

Flipped it over to trial and fit seat belt mounting and suspension end stop frame, still possible for 1 person to achieve.
Flipped it back on it's wheels for final fitting and tack welding.

Attachments:
1422342_470147313084853_7271130385005284201_n.jpg
1422342_470147313084853_7271130385005284201_n.jpg [ 106.97 KiB | Viewed 5861 times ]

Author:  lpgo [ April 17th, 2014, 9:31 pm ]
Post subject:  Re: AZS modified

Looking nice..... when can we see the first video of the rising on air?????

Author:  AZS [ April 21st, 2014, 1:20 am ]
Post subject:  Re: AZS modified

Maybe at the time that somebody else makes and uploads that video, i'm not much of a video guy ;)
Electrics aren't connected yet, for now i use the workshop compressor and put some wires together. If things are working a bit more easy, i'll try to put it on film.

Author:  lpgo [ April 21st, 2014, 1:32 am ]
Post subject:  Re: AZS modified

AZS wrote:
Maybe at the time that somebody else makes and uploads that video, i'm not much of a video guy ;)
Electrics aren't connected yet, for now i use the workshop compressor and put some wires together. If things are working a bit more easy, i'll try to put it on film.


Can't wait......

Author:  AZS [ May 7th, 2014, 9:43 am ]
Post subject:  Re: AZS modified

Fiddling with the gearchange and handbrake, handbrake assembly is moved to the other side of the gearbox.
And did a bit of playing with the wheels, the tape was very helpful in hiding the damage on the rims ;)

Attachments:
10271468_478252918940959_3145819955016404072_n.jpg
10271468_478252918940959_3145819955016404072_n.jpg [ 120.49 KiB | Viewed 5788 times ]
10337750_478277942271790_6233623377428717189_n.jpg
10337750_478277942271790_6233623377428717189_n.jpg [ 140.41 KiB | Viewed 5788 times ]
10264669_478277925605125_8662284393461630351_n.jpg
10264669_478277925605125_8662284393461630351_n.jpg [ 141.63 KiB | Viewed 5788 times ]

Page 2 of 3 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/