International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
AZS modified http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=5172 |
Page 2 of 3 |
Author: | Russell [ March 12th, 2014, 9:55 am ] |
Post subject: | Re: AZS modified |
I put the camera in front of the back axle and held each rear leg and wobbled. Engine not running on account of all the wiring and battery still on the bodyshell. |
Author: | AZS [ March 31st, 2014, 12:56 pm ] |
Post subject: | Re: AZS modified |
Snsmrbrt wrote: Wondering if this is the same AZS I owned in the 1980s? Was rose grey with reg DAC....J I think! It's name Piaf was painted on the boot lid. Rob Sansome Originally this car was red, before painted black. As far as i know it spent all of it's life in the Netherlands. |
Author: | Neil [ April 7th, 2014, 9:10 pm ] |
Post subject: | Re: AZS modified |
Nice! |
Author: | AZS [ April 10th, 2014, 1:42 pm ] | ||
Post subject: | Re: AZS modified | ||
modified the cooling tunnel to be able to mount the engine 24mm lower in chassis
|
Author: | AZS [ April 17th, 2014, 8:24 pm ] | ||
Post subject: | Re: AZS modified | ||
Flipped it over to trial and fit seat belt mounting and suspension end stop frame, still possible for 1 person to achieve. Flipped it back on it's wheels for final fitting and tack welding.
|
Author: | lpgo [ April 17th, 2014, 9:31 pm ] |
Post subject: | Re: AZS modified |
Looking nice..... when can we see the first video of the rising on air????? |
Author: | AZS [ April 21st, 2014, 1:20 am ] |
Post subject: | Re: AZS modified |
Maybe at the time that somebody else makes and uploads that video, i'm not much of a video guy Electrics aren't connected yet, for now i use the workshop compressor and put some wires together. If things are working a bit more easy, i'll try to put it on film. |
Author: | lpgo [ April 21st, 2014, 1:32 am ] |
Post subject: | Re: AZS modified |
AZS wrote: Maybe at the time that somebody else makes and uploads that video, i'm not much of a video guy Electrics aren't connected yet, for now i use the workshop compressor and put some wires together. If things are working a bit more easy, i'll try to put it on film. Can't wait...... |
Author: | AZS [ May 7th, 2014, 9:43 am ] | ||||
Post subject: | Re: AZS modified | ||||
Fiddling with the gearchange and handbrake, handbrake assembly is moved to the other side of the gearbox. And did a bit of playing with the wheels, the tape was very helpful in hiding the damage on the rims
|
Page 2 of 3 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |