View unanswered posts | View active topics It is currently March 29th, 2024, 12:13 am



Reply to topic  [ 438 posts ]  Go to page 1, 2, 3, 4, 5 ... 44  Next
 1988 2cv D*lly bits and bobs 
Author Message
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post 1988 2cv D*lly bits and bobs
just thought id post a few pics of what ive been up to today....

my intentions are restoring the car when it starts to rust - however todays job was rust proventian mostly!

with a few cosmetic bits

boot lid kindly given to me by someone in my club
todays job to rub back the red oxide i did a few weeks ago in prep for painting
Image


then cleaned the matt as it rained and my car leaks badly :( so took matt out to let inside of car dry - thought i might as well clean the matt while it was out and wet
Image


now time to prep the boot for its coat of POR 15 - heard mixed reviews (After buying it) but i thought no harm in trying it - will let everyone know how it goes (this is the metal ready stage after de greasing the metal / paint
Image


next - start washing the metal ready out the boot, down drain hole - have an idea for the drain hole, ill post when i have put my idea in to practice and it works (i hope) and the POR 15 paint (apparently it goes along way!)
Image


hope i didnt bore you but i thought i would make this post anyway :)

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


Last edited by J-dub on May 27th, 2010, 2:39 pm, edited 2 times in total.



May 27th, 2010, 2:29 pm
Profile WWW
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv
must add the POR 15 comes in 3 colours i believe, i got black for some reason.....

more photos to come...

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 2:37 pm
Profile WWW
Firing on two.
User avatar

Joined: November 16th, 2009, 10:14 am
Posts: 211
Location: Aylesford, Kent
Post Re: 1988 2cv D*lly bits and bobs
James

I used POR15 to paint the hubs and suspension on my car when I re-chassised it. A couple of bits of advice. The tin lid was a right bugger to lever off and so badly damaged that an airtight seal on the tin was impossible. After a few days the paint in the tin was rock hard so had to be thrown away before it was used up. Also clean your brushes well as to find them rock hard next day is irritating.

Other than that I found POR15 was excellent and gave a good hard glossy finish, better than Smooth Hammerite.

_________________
Image


May 27th, 2010, 2:51 pm
Profile
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv D*lly bits and bobs
thanks for the tips paul

lid came of perfectly and didnt damage it

just re sealed it

when i do a full restore i think POR 15 is going everywhere on the car think its 25£ for a huge tin

anyway latest progress - next will follow in 5 while the photos upload

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 3:18 pm
Profile WWW
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv D*lly bits and bobs
coat one - small bubbles/white pockets will be gone after coat 2


first coat, after first coat has dried i will masking tape up to give a straight (well ill try my best) finish and a tidy one
Image

the irritating white bits i was on about - they shall be gone by the next coat i hope
Image


sorry about blurry ness but thought i would i post it anyway - nice and shiny :D
Image

after all this have just over half a tin left over, and tons of the prepration stuff left over - i bought the starter kit, i highly reccomend the starter kit, i managed to get some from a place called frosts, it was about 20£ and it even came with gloves and paint bruses etc :D

i will be ordering a big tin of it i think sometime soon

*edit
forgot to mention that this coat should dry between 2 and 6 hours

so my next eventful psot will be in abuot 4 horus time i hope!!

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 3:24 pm
Profile WWW
Firing on two.

Joined: July 23rd, 2009, 4:03 pm
Posts: 1019
Location: Bournemouth
Post Re: 1988 2cv D*lly bits and bobs
nice job! looking forward to seeing some more progress!

_________________
Image
Gas, Grass or Ass. No-one ride for free.


May 27th, 2010, 3:31 pm
Profile
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv D*lly bits and bobs
thanks :)

if anyone wants to inspect my painting at the L TO B they can as i will be there

from the progress so far i like POR 15 but the proof is in the puding i geuss

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 3:40 pm
Profile WWW
Agony Aunt - You have a car problem? Speak to Ken

Joined: March 6th, 2009, 1:40 am
Posts: 3675
Post Re: 1988 2cv D*lly bits and bobs
Hmmm,
some pics, from my mate Chris Stuart in Perth, WA of how POR performed on the body and Citroen chassis of his Charleston, which he rebuilt about 10 years ago... :(

< http://www.flickr.com/photos/46885893@N04/?saved=1 >

After subjecting the 'wee bus' to a couple of Raids, he'd taken it apart to sort out any minor problems and wasn't too happy with the POR, to say the least.

The main problem seems to be that it forms a relatively hard skin or crust, but when that's perforated, rust will continue to spread underneath the apparently sound paint.


ken

_________________
Image


May 27th, 2010, 3:47 pm
Profile
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv D*lly bits and bobs
well thats why i had heard mixed reviews i geuss

but its worth a shot,

my boot doesnt leak to much, its mostly just to tart it up and to stop rust a bit

the bottom of my car is wax oiled in cluding the bottom of the boot so we will see what happens!

thanks ken

James

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 3:54 pm
Profile WWW
Aircooled Idiot
User avatar

Joined: April 24th, 2010, 10:01 am
Posts: 5733
Location: Location Location
Post Re: 1988 2cv D*lly bits and bobs
meant to add

my boot isnt actually that rusty well not at all

its a preventative so we will see what happens in time

also just out to try and sort leak out in vent flap

think its the rubber seal - any advice would be great
thanks

_________________
Image

1988 2cv 652cc
1993 Toyota Hilux Surf 3000cc runs on Bio Diesel
2004 Toyota Landcruiser Amazon 4200cc runs on Bio Diesel
1998 Daihatsu Hijet 1300cc
2005 Susuki Bandit 650cc


May 27th, 2010, 3:57 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 438 posts ]  Go to page 1, 2, 3, 4, 5 ... 44  Next

Who is online

Users browsing this forum: No registered users and 98 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.