front brakes off, strip clean and new seals will be the next job...
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| my 83 2cv6 'CLUB' http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=4963 |
Page 6 of 6 |
| Author: | subarupete [ October 24th, 2014, 8:07 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Wanted some cad drawings really, thanks anyway |
|
| Author: | PatrickMason [ October 31st, 2014, 4:05 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
If you give me an engineering drawing, I could easily draw one in NX for you... |
|
| Author: | subarupete [ October 31st, 2014, 4:20 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Thanks, but I don't have drawings at all. |
|
| Author: | PatrickMason [ October 31st, 2014, 7:17 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Fair... If you get any dimensions and can draw a sketch, give me a shout if you want it done |
|
| Author: | db78 [ November 28th, 2014, 6:23 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
front brakes off, strip clean and new seals will be the next job... |
|
| Author: | db78 [ December 11th, 2014, 7:28 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Heres my progress today on the brakes, after trying to push the pistons out with air I gave up at 6bar! next step was hydraulic power so machine a -3/-3 an fitting to a -3/m8x1.25 fitting to allow me to fit some hoses to the hydraulic pump. 4-5 pumps and out each piston popped.   Aswell as the brake refurb I have found a little time to progress the engine conversion. Also attached a pic of the co-ordinates should any of you need them for the bmw crank/flywheel PCD.    
|
|
| Author: | fritz [ December 23rd, 2014, 9:43 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Excellent work! Look forward to seeing another one zooming around. |
|
| Author: | db78 [ January 1st, 2015, 1:38 am ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Thanks Fritz, calipers painted now so will fit New seals and get them on the car. Also have a Morris minor so splitting my time between projects. |
|
| Author: | db78 [ January 5th, 2015, 6:55 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Back to caliper rebuilding today, They are now painted and spent some time cleaning the surfaces and getting the grooves for the new seals nice and clean. Just waiting on a delivery of LHM fluid so that I can install the new seals and pistons then refit to the car.. Another job closer to the MOT before I do the BMW engine swap. |
|
| Author: | db78 [ February 17th, 2015, 9:11 pm ] |
| Post subject: | Re: my 83 2cv6 'CLUB' |
Longest ever caliper build!!! finally got them back together today with new seals..  Will get these back on the car soon and then see about booking for mot!! |
|
| Page 6 of 6 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|