International2cvFriends.com
http://www.international2cvfriends.com/forum/

1965 2CV AZ
http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=4958		 Page 4 of 10
Author:  subarupete [ April 16th, 2016, 8:46 am ]
Post subject:  Re: 1965 2CV AZ
Like the excellent work
Author:  Geert [ August 11th, 2016, 5:31 pm ]
Post subject:  Re: 1965 2CV AZ
See if everything still fits before we go on .
ImageIMAG1876 by Deux Chevaux, on Flickr
ImageIMAG1878 by Deux Chevaux, on Flickr
ImageIMAG1879 by Deux Chevaux, on Flickr
ImageIMAG1883 by Deux Chevaux, on Flickr
Author:  Geert [ August 28th, 2016, 3:50 pm ]
Post subject:  Re: 1965 2CV AZ
We made some progress last weekend ;
By my brother made sheet metal, with old, rusted part and cardboard template.
It is for sale in every 2CV parts store, but it is more fun to make it yourself .
ImageIMAG2017 by Deux Chevaux, on Flickr
ImageIMAG2016 by Deux Chevaux, on Flickr


ImageIMAG2012 by Deux Chevaux, on Flickr
We are very happy with these clips .
ImageIMAG2010 by Deux Chevaux, on Flickr

We will have to weld this properly later.
ImageIMAG1999 by Deux Chevaux, on Flickr
The front wings fit too, but it is getting tight with two 2CV's .
ImageIMAG1992 by Deux Chevaux, on Flickr
Author:  rob massey55 [ August 28th, 2016, 7:43 pm ]
Post subject:  Re: 1965 2CV AZ
Great work, those cleco pin clamps are very useful.
Author:  Geert [ November 27th, 2016, 9:49 am ]
Post subject:  Re: 1965 2CV AZ
Image20161016_153637 by Deux Chevaux, on Flickr
Image20161030_124550 by Deux Chevaux, on Flickr
Image20161030_124559 by Deux Chevaux, on Flickr
Image20161120_110032 by Deux Chevaux, on Flickr

Almost there ;-)
Author:  subarupete [ November 27th, 2016, 4:37 pm ]
Post subject:  Re: 1965 2CV AZ
@Geert
Air Tool in the last picture, is it from Lidl?
How would you rate it?
Cheers
Peter

ps Ik ben prijs bewust ;)
Author:  Geert [ November 28th, 2016, 8:46 am ]
Post subject:  Re: 1965 2CV AZ
It is from Lidl, it does what it should do, but only up to 1 mm !
For the money it costs it is oke, there are far better tools , but it is oke.
Author:  Boggy [ December 14th, 2016, 9:00 pm ]
Post subject:  Re: 1965 2CV AZ
Hi Geert
In photo of shell https://flic.kr/p/K7qJhS I see you have bearings fitted where pedals go through bulkhead can I ask where you got them from
cheers
Boggy
Author:  Geert [ December 14th, 2016, 10:34 pm ]
Post subject:  Re: 1965 2CV AZ
Boggy wrote:
Hi Geert
In photo of shell https://flic.kr/p/K7qJhS I see you have bearings fitted where pedals go through bulkhead can I ask where you got them from
cheers
Boggy

The floor panel came from "Der Franzose " ( CiPeRe for France ) Complete with the bushes you are refering to :

plancher sous pédales, Citroën 2cv avec pédales rondes, plancher double avec palier de passage des pédales, refabrication, tôle renforcée et traitement anti-rouille par électrolyse. Avec deux douilles en alliage pour le passage de la commande d'embrayage et des freins.

https://www.franzose.de/en/Citroen-2CV/ ... /ANR15618/

https://www.cipere.fr/fr/Citroen-2CV/Al ... /ANR15618/
Author:  Geert [ April 6th, 2017, 4:00 pm ]
Post subject:  Re: 1965 2CV AZ
Finally it is becomming a 2Cv again

ImageDSCF0799 by Deux Chevaux, on Flickr
ImageDSCF0798 by Deux Chevaux, on Flickr
ImageDSCF0797 by Deux Chevaux, on Flickr
ImageDSCF0796 by Deux Chevaux, on Flickr
Page 4 of 10 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/