International2cvFriends.com
http://www.international2cvfriends.com/forum/

1965 2CV AZ
http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=4958		 Page 3 of 10
Author:  Geert [ July 26th, 2015, 9:00 am ]
Post subject:  Re: 1965 2CV AZ
It took some time, but we nearly finished the engine overhaul :
ImageIMAG1002 by Deux Chevaux, on Flickr
ImageIMAG1057 by Deux Chevaux, on Flickr
ImageIMAG1062 by Deux Chevaux, on Flickr
ImageIMAG1066 by Deux Chevaux, on Flickr
ImageIMAG1069 by Deux Chevaux, on Flickr
ImageIMAG1068 by Deux Chevaux, on Flickr

Many thanks to our 4 legged helpers Murhpy and Tom .
They are great in getting in your way :-)
Author:  subarupete [ July 26th, 2015, 12:59 pm ]
Post subject:  Re: 1965 2CV AZ
looking very tidy
Author:  Geert [ July 29th, 2015, 4:52 pm ]
Post subject:  Re: 1965 2CV AZ
subarupete wrote:
looking very tidy

Hope it will run !
Author:  lpgo [ July 29th, 2015, 6:26 pm ]
Post subject:  Re: 1965 2CV AZ
You must do things very wrong to make these old engines not to run. It will just run fine.. ;) ;)
Author:  Geert [ July 29th, 2015, 7:35 pm ]
Post subject:  Re: 1965 2CV AZ
Geo :
So you have Wifi in Poland ?
Author:  lpgo [ July 30th, 2015, 9:08 pm ]
Post subject:  Re: 1965 2CV AZ
Geert wrote:
Geo :
So you have Wifi in Poland ?
logging in at the local mc donalds or restaurant
Author:  AZL57 [ July 31st, 2015, 12:15 am ]
Post subject:  Re: 1965 2CV AZ
I always had doubts if McDonalds was a restaurant.... :mrgreen: :mrgreen:
Looks great Geert it reminds me of the triple transplant i have to do on the 2 57 models. One rebuild (original?) engine back in the green one, the rebuild eingine that is in there has to swap to the ivory one after finding the oil leak. The engine in there than can be taken on for some very overdue maintenance... :ugeek:
Author:  Geert [ December 25th, 2015, 10:40 am ]
Post subject:  Re: 1965 2CV AZ
For anyone who thought we had given up on this :
ImageIMAG1340 by Deux Chevaux, on Flickr

And now the body:

ImageIMAG1213 by Deux Chevaux, on Flickr
ImageIMAG1204 by Deux Chevaux, on Flickr



Which hole ?
ImageIMAG1220 by Deux Chevaux, on Flickr
ImageIMAG1214 by Deux Chevaux, on Flickr
ImageIMAG1217 by Deux Chevaux, on Flickr

More pics. on Flickr, but they all show rust .....and holes ;)
Author:  Geert [ January 1st, 2016, 10:41 am ]
Post subject:  Re: 1965 2CV AZ
On wednesday we did a fiddly job :
ImageIMAG1398 by Deux Chevaux, on Flickr
ImageIMAG1407 by Deux Chevaux, on Flickr
ImageIMAG1410 by Deux Chevaux, on Flickr
ImageIMAG1411 by Deux Chevaux, on Flickr
ImageIMAG1416 by Deux Chevaux, on Flickr

The steel is only fixed with a few welds, proper welding still needs to be done later .
Author:  Geert [ April 15th, 2016, 10:06 pm ]
Post subject:  Re: 1965 2CV AZ
Some more progress made , we are getting to the end at last ;)

ImageIMAG1530 by Deux Chevaux, on Flickr

ImageIMAG1528 by Deux Chevaux, on Flickr
Fitting the windscreen, just to make sure .
ImageIMAG1525 by Deux Chevaux, on Flickr
ImageIMAG1547 by Deux Chevaux, on Flickr
ImageIMAG1594 by Deux Chevaux, on Flickr
ImageIMAG1596 by Deux Chevaux, on Flickr
ImageIMAG1598 by Deux Chevaux, on Flickr
ImageIMAG1599 by Deux Chevaux, on Flickr
Page 3 of 10 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/