My son made some parts himself ˝just for fun ˝:






And with some newly bought replacement parts it all comes nicely together :

My AZ dates from june 1965, so it could be issued with 3 side windows, or with 2 on each side.
This one has original 3 side windows, but we decided to convert it to 2.
Now i have a question.
The place of indicator on the side near the rear door differs in these two cases.
What i need to know is where the indicator should be located when the car only has two side windows .
Could someone please measure the distance from the rearside of the B pillar , and the distance from the bottom of the sill, or bottom rear wing to the central hole where the indicator is positioned ?

Many thanks in advance

Hi Geert same position as the earlier cars. I can measure that for you. Maybe this pictures will help too?
https://2cvgarage.nl/aanbod/2cv-az-2/

That would be great if you could do that.
I have photo' s of older cars, but not the exact position of the indicator . I can' t measure it from a photo.
Many thanks !

Dag Geert, The middle hole is 34cm up from the innerwing and 10cm (horizontaly) from the rear door frame. Both measured from the inside. Diameter 1 cm.

Thank you ! Great help !
Have a good and peaceful Christmas !

Thanks, you too.

Before spraying the body, we put it together for the test. Now we come across a small problem.
How is that little clamp on the back of the rear mudguards fixed ? We tried to fix it,but we can't get it fixed properly .

It normally is hammered on from the bottom. Think of fitting the aluminum lining between wing and body first.
Here an interesting catalogue for you with also the later 18HP models
http://jplerouge.free.fr/2cv/2cv%201949-68.pdf