International2cvFriends.com
http://www.international2cvfriends.com/forum/

acadiane RHT144Y
http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=3006		 Page 1 of 2
Author:  tarquin slough2cv [ May 13th, 2011, 5:57 pm ]
Post subject:  acadiane RHT144Y
hope fully there are some pics of the acad here
Author:  Neil [ May 13th, 2011, 6:00 pm ]
Post subject:  Re: acadiane RHT144Y
I'll stick some pictures up for you if you can write a bit of a story to go with 'em?!
Author:  tarquin slough2cv [ May 13th, 2011, 6:06 pm ]
Post subject:  Re: acadiane RHT144Y
file size is to big im working on it
Author:  tarquin slough2cv [ May 13th, 2011, 6:09 pm ]
Post subject:  Re: acadiane RHT144Y
ok then neil this is the acad that ive owned for about 5 years. as you can see from the pics the engine bay has been totally resprayed overhauled. I have got bx front seats fitted as well as a 6 speaker cd player with amp. Unfortunatly This van has to go watch this space or see flea market
Author:  Neil [ May 13th, 2011, 6:17 pm ]
Post subject:  Re: acadiane RHT144Y
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Author:  Neil [ May 13th, 2011, 6:20 pm ]
Post subject:  Re: acadiane RHT144Y
Image

Image

Image

Image

Image
Author:  tarquin slough2cv [ May 13th, 2011, 6:23 pm ]
Post subject:  Re: acadiane RHT144Y
thanks mate
Author:  Neil [ May 13th, 2011, 6:53 pm ]
Post subject:  Re: acadiane RHT144Y
Image

Image

Image

Image

Image
Author:  tarquin slough2cv [ April 22nd, 2012, 11:09 pm ]
Post subject:  Re: acadiane RHT144Y
Productive weekend first job get van out from its 3 and half year slumber down the bottom of dads garden in the rehumidified 3 car garage. drove it round to my house. Dismantled the bed and removed front seats (bx). Next strip out all interior in rear. found in " stock " acadiane front mixte folding seat with split shit cover on it removed cover from standard 2cv and fitted to mixte frame. Next found in "stock " good drivers side standard 2cv seat and rear seat 2cv. fitted the drivers seat to acad now the fun bit fitting the rear seat, wont fit to wide. strip the foam and seat rubbers and all material off. Cut frame in 6 places 3 on each side cut out 5cm on each side and re weld. Just got to paint the seat frames and refit the foam and covers. Next job is to actually fit the rear seat hopefully wont be to bad. Then I need 3 point seat belts fitting in the rear. not sure how to do that yet but im sure i will work it out
Author:  tarquin slough2cv [ April 22nd, 2012, 11:10 pm ]
Post subject:  Re: acadiane RHT144Y
any ideas on 3 point seat belts welcome
Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/