| Author |
Message |
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
 Re: MY AZU B 1974   Did some welding on Monday, but had to stop because it got too dark. The light was fading
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| January 11th, 2012, 9:31 pm |
|
|
|
2cvkeza
Firing on two.
Joined: February 11th, 2010, 11:36 am
Posts: 602
Location: Slovenia
|
Re: MY AZU B 1974 Very good progress... It will be super car.
_________________
www.2cvkeza.com
|
| January 12th, 2012, 8:52 am |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: MY AZU B 1974 Is the rear wing spot welded on?
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| January 12th, 2012, 9:26 am |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: MY AZU B 1974 dave 411 wrote: Is the rear wing spot welded on? Yes it is welded on ! I don't know if you would call it spotwelding, it is welding into little wholes you make in the metal before welding. So not by using the two copper rods on each end of the metal .
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| January 12th, 2012, 4:28 pm |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: MY AZU B 1974 Was the back end an easy job?Mine could do with new rear wings and repair panels where the rear light is fitted.
I presume its a case of finding the spot welds and drilling them out?
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| January 12th, 2012, 4:39 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: MY AZU B 1974 It was a relatively easy job, also thanks to the lower crossmemberbox 2CVKEZA made for me .Which fitted very well ! As did the other panels .
As you suggest, finding the spotwelds and drilling them out. Don't use a drill that is too large!! 8MM is too large, I would advise you should use 5 mm maximum instead.
Spotweld-drills are very handy as they have a centerpoint that prevents them from slipping .
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
Last edited by Geert on January 12th, 2012, 10:53 pm, edited 2 times in total.
|
| January 12th, 2012, 5:31 pm |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: MY AZU B 1974 Do you use the spot weld drill to drill the holes in th new panel?
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| January 12th, 2012, 6:07 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: MY AZU B 1974 dave 411 wrote: Do you use the spot weld drill to drill the holes in th new panel? No, I used sheet metal punshing pliers : http://www.rustbuster.nl/Catalogus/G0001%201010.jpgI can't find it on an English site, but they must be available in England somewhere Sorry, I made a mistake!! You should use a 5 mm drill!! Not an 8 MM ! 8 MM is too Large!!
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| January 12th, 2012, 7:34 pm |
|
|
|
dave 411
Firing on two.
Joined: August 19th, 2010, 10:44 pm
Posts: 1815
Location: Cardiff
|
Re: MY AZU B 1974 Wow,they look like a serious pair of pliers 
_________________
[img]http://i1207.photobucket.com/albums/bb480/alastairsmith999/dave411-5.png[/im
g]Horizontally Opposed
|
| January 12th, 2012, 10:11 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: MY AZU B 1974 I did some more welding last weekend . And I am very happy with the rear lower crossmemberbox Janez ( 2CVKeza ) made for me .    Good Job Janez! Thanks a lot !
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| January 16th, 2012, 8:45 pm |
|
|
