| Author |
Message |
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
 Van repairs Morning all, I'm working on the cargo floor area, fitting a new valence panel  IMG_3078 by Robndaisy, on Flickr I bolted it to the chassis rails but it was sitting too low about 25mm  IMG_3083 by Robndaisy, on Flickr so I packed it up with some square tube so now it's level with the floor but it is fouling the bottom of the chassis rails if you see what I mean! Has anyone got a pic of how it should fit? Cheers, rob.
|
| September 1st, 2015, 10:15 am |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: Van repairs there is something wrong there , but I can't see what it is. It should fit perfectly .
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| September 1st, 2015, 12:03 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs Cheers Geert, I went looking for the old valence, what's left of it!  IMG_3092 by Robndaisy, on Flickr Now I see the difference! I'll have to modify 
|
| September 1st, 2015, 6:13 pm |
|
|
|
Geert
Firing on two.
Joined: July 10th, 2010, 12:35 pm
Posts: 1094
Location: Magyarország
|
Re: Van repairs It is too low,
You should order one from 2CV KEZA, I think ECAS sells them in the UK. They should fit 100 % !
_________________
'T is een kwestie van geduld.........
Ez a türelem kérdése.........
|
| September 1st, 2015, 6:18 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs Yeah, it came from UK, I must have ordered the wrong one!
|
| September 1st, 2015, 7:29 pm |
|
|
|
Roy Eastwood
Firing on two.
Joined: February 4th, 2009, 2:52 pm
Posts: 268
|
Re: Van repairs
|
| September 2nd, 2015, 12:45 pm |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: Van repairs Isn't AZU lower than AK, since the AZU is shorter (cross bar further forward)
_________________
|
| September 2nd, 2015, 12:55 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Van repairs Cheers Roy, I ordered the wrong bit. http://www.ecas2cvparts.co.uk/rear-lowe ... -1693.htmlI'll have to order the right part after next payday.
|
| September 2nd, 2015, 6:51 pm |
|
|
|
2cvkeza
Firing on two.
Joined: February 11th, 2010, 11:36 am
Posts: 602
Location: Slovenia
|
Re: Van repairs Peter... AZU has shorter chassis so back crossmember is higher than AK...
Attachments:
AZU AK PRIMERJAVA.jpg [ 903.68 KiB | Viewed 65928 times ]
_________________
www.2cvkeza.com
|
| September 3rd, 2015, 11:00 am |
|
|
|
2cvkeza
Firing on two.
Joined: February 11th, 2010, 11:36 am
Posts: 602
Location: Slovenia
|
Re: Van repairs rob massey55 ... I just looked at your van pictures there at Flickr... "crist" ... looks like big job at that AZU ...  For cars like this I produce and assembly complete back bed ... It is AK350 on photo but I do assembly AZU, 250 and Acadiane sets as well... Ask Roy ECAS for some more AZU panels... like 2. and 3. crossmember, side B post panels and inner wings. It will be easyer for you to rebuild this AZU completly with my panels...
Attachments:
AK350 izdelki 2015 proba sestava varjenje (20) m.jpg [ 439.41 KiB | Viewed 65928 times ]
_________________
www.2cvkeza.com
|
| September 3rd, 2015, 11:16 am |
|
|
